1. Scope
1.1 This Standard applies to portable industrial oil-fired heaters irrespective of the heating capacity, the type of burner or the motive power.
1.2 The requirements given herein apply to units which may be indirect-fired or direct-fired, vented or unvented, and which may be used with or without duct work.
1.3 The requirements given herein apply to direct-fired or indirect-fired…
1. Scope
1.1 This Standard applies to complete commercial-industrial steam cleaning
machines which are either gas*-fired or oil+-fired.
*Natural, manufactured or liquefied petroleum gas, etc.
+Grades as listed in CSA Standard B140.0, Definitions and General Requirements
for Oil Burning Equipment.
1.2 The requirements of Clauses 1 to 8, apply to both oil-fired steam cleaning
machines…
Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 3: Equipment wires, T...
Applicable to equipment wires with solid or stranded conductor, polyvinyl chloride (PVC) insulated, in singles, pairs and triples. The object of this standard is to specify requirements for wires used for the internal wiring of telecommunication equipment and of industrial and consumer electronic equipment.
Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only.
Also applies to:
- switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s;
- lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not…
1. Scope
1.1 This Standard applies to cord-connected, motor-operated floor surfacing
and cleaning machines rated at 600 volts or less which are designed to be used
in accordance with the Rules of the Canadian Electrical Code, Part I, on an ac
or dc circuit.
1.2 This Standard applies to commercial and industrial floor polishing
machines, floor scrubbing machines, sanders, grinders or…
