Propylene and butadiene for industrial use — Sampling in the liquid phase
Describes the procedure and the precautions to be taken in drawing representative samples of the substances for the purpose of their analyses. It also sets out, in Annex A, a diagrammatic representation of a system for the disposal of the portion of the sample not used in the analysis, and, in Annex B, the sequence of operations for filling a sample cylinder.
1. Scope
1.1 This Standard applies to fixed equipment or accessories, or both, that utilizes signals to measure or control directly or indirectly an industrial process through a final control device (or devices) and is intended to be connected to supply circuits with voltages of 750 V and less, for use indoors or outdoors in nonhazardous locations in accordance with the Canadian Electrical…
Lubricants, industrial oils and related products (class L) — Classification — Part 3A: Family D (Com...
Establishes the detailed classification of lubricants in use for air compressors. Forms the preliminary part, including gas compressors and refrigeration compressors. The intention is to provide a rationalized range of the most commonly used, internationally available lubricants for air compressors, without resorting to unnecessary restriction by specifications or product description. The primary…
Lubricants, industrial oils and related products (class L) — Classification — Part 8: Family R (Temp...
Specifies the detailed classification. Should be read in conjunction with ISO 6743-0. It includes only those products the main function of which is to ensure temporary protection, the word "temporary" being relevant not to time-limit product efficiency but to the capacity for removal of the product after a certain time. It excludes products that are applied for other purposes but also…
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical pur...
Contains the definitions related to and the general requirements to be fulfilled by industrial laminated sheets for electrical purposes, made with any of the following resins as the binder: phenolic, unsaturated polyester, polyimide, epoxide, melamine and silicone. This part also contains the general requirements for the rigid laminated sheets.
Safety in electroheat installations. Part 9: Particular requirements for high-frequency dielectric h...
Applies to industrial high-frequency heating installations for the purpose of thermal applications such as assembly by melting, melting and drying of partially or non-conductive materials.
Relates to high-frequency dielectric heating installations, in the range 1 MHz to 300 MHz with output power greater than 50 W comprising high-frequency generators, and capacitors for the charge to be heated…
Installation Code for Lightning Protection Systems
1. Scope
1.1 This Standard covers the protection from lightning of buildings such as residences, places of public assembly, and buildings of a general industrial nature, including structures with explosive or highly flammable contents. It does not cover th e protection of electrical transmission and distribution systems, and communications systems.
1.2 This Standard also contains a…
Produits pétroliers — Combustibles (classe F) — Classification — Partie 2: Catégories des combustibl...
La présente partie de l'ISO 8216 établit la classification détaillée des combustibles pour turbines à gaz en service dans l'industrie et la marine, à l'exclusion des combustibles aviation. Elle doit être lue conjointement avec l'ISO 8216/0. Les combustibles retenus dans la présente classification sont ceux utilisés pour les turbines à gaz dans l'industrie ou pour les…
