Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diamete...
Tabulates a comprehensive range from which preferred groups of combinations may be chosen. The percentage open area of each combination is stated. The screens shall be designated in the following sequence by a) width of aperture, b) diameter of wire, c) material of wire, d) type of weave or type of crimp.
Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diamete...
Tabulates values which are taken from the general list of combinations given in ISO 4783/1. Applies to aperture sizes from 16 mm to 0.02 mm. The wire cloth shall be designated in the following sequence by a) width of aperture, b) diameter of wire, c) material of wire, d) type of weave.
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Gr...
Defines levels of performance of anodic oxide coatings that have been subjected to corrosion tests. The rating system is applicable to pitting corrosion of the basis metal resulting from accelerated tests, exposure to corrosive environments and practical service tests. It is frequently used for rating the results of short term corrosion tests on relatively thin anodic coatings such as those used…
Plugs, socket-outlets and couplers for industrial purposes. Part 2:
Dimensional interchangeability r...
Applies to plugs and socket-outlets, cable couplers with a rated
operating voltage not exceeding 690 V, 500 Hz and a rated current
not exceeding 125 A. , primarily intented for industrial use ,
either indoors or outdoors.
1. Scope
1.1 This Standard applies to portable hand-held electrically heated tools for voltages of 250 V and less, designed to be used in ordinary (ie, nonhazardous) locations in domestic, commercial, or industrial applications in accordance with the Rules of the Canadian Electrical Code, Part I.
For convenience the shorter term tools is used herein, except as otherwise stated.
1.2 This…
Oil/Gas-Fired Commercial/Industrial Pressure Washers and Steam Cleaners
1. Scope
1.1 This Standard covers the performance, construction, testing, marking, installation, operation, and servicing of complete commercial/industrial pressure washers and steam cleaners that are either gas-fired or oil-fired.
1.2 The Standard applies to
(a) complete machines comprising a continuous coil-type heating system, with no space for steam accumulation, in which the…
Preparation of function charts for control systems
Describes an implementation-independent graphical representation
method based on an industrial application of 'PETRI nets' used for
the study of the co-ordination of asynchronous events. May also be
applied to non-electrical systems.
