Exigences générales relatives aux portes planes en bois
1.1
Cette norme énonce les critères relatifs à la qualité, aux dimensions et à la
terminologie pour les modèles courants, les dimensions et la pathologie des
portes planes en bois. Les exigences portent sur les placages en bois, les
contreplaqués, les stratifiés décoratifs, les panneaux en fibres de bois et de
composition ; les colles ; la construction des âmes ; le degré d'humidité du…
Position des organes de ferrage sur les portes planes en bois
1.1
Cette norme établit la position des organes de ferrage sur les portes planes en
bois, à âme pleine ou alvéolée, dont les dimensions sont les suivantes : 1 3/8
po (34,9 mm) et 1 3/4 po (44,4 mm) d'épaisseur x 6 pi 8 po (2032 mm) et 7 pi 0
po (2134 mm) de hauteur.
1.2
La norme énonce les critères relatifs à la qualité, aux dimensions et à la
terminologie en ce qui a trait à la…
Textile Test Methods Resistance of Woven Fabrics to Seam Slippage
1.1 This method is for evaluating the resistance to slippage of weft yarns on
warp yarns, or warp yarns on weft yarns, at the seam of a woven fabric.
1.2 The method is particularly applicable to apparel and furnishing fabrics
but is not intended for use on heavy industrial fabrics.
1.3 The method specifies two seams, one intended for use with apparel fabrics
and the other for use with…
Digital audio tape recorder reel to reel system, using 6,3 mmmagnetic tape, for professional use - P...
Applies to stereophonic digital audio recording on 6,3 mm wide tape with stationary heads for professional use. Defines the mechanical and electrical characteristics necessary to ensure the interchangeability of programme recorded digital audio signal on magnetic tape amongst professional industries.
Specifies flange dimensions, driving component dimensions, and reference values for torque and thrust for flanges. This first edition cancels and replaces ISO 5210-1:1977, ISO 5210-2:1979 and ISO 5210-3:1982. Annex A is for information only.
1. Scope
1.1
This standard applies to ac and dc type power supplies including rack-mounted
and modular units, for commercial and industrial, indoor and outdoor use in
nonhazardous locations in accordance with the Rules of the Canadian Electrical
Code, Part I.
Note: These power supplies may include battery charging functions.
1.2
Clauses l to 6 are general in nature and apply, unless…
Clauses 1 to 7 apply to control and protective devices, and
devices accessory thereto, rated at not more than 1500 V, for
starting, stopping, regulating, controlling, or protecting
electric motors, generators, heating apparatus, or other
equipment and intended to be installed and used in nonhazardous
locations in accordance with the Rules of the Canadian Electrical
Code, Part I.
Only PART of this standard is replaced by C22.2 No.1335.1-93 (R2004); please see preface for details.
1. Scope
1.1 This Standard applies to cord-connected and permanently connected cooking and liquid-heating appliances
rated for use on nominal single-phase system voltages of 240 V and less, designed to be used in nonhazardous locations in household and similar applications in…