Rechercher

ISO 21307:2011 establishes general principles regarding the procedure used in the construction and quality assessment of butt fusion joints incorporating fittings (ISO 8085-2) and pipes used in the construction of gas (ISO 4437) and water (ISO 4427) distribution systems made with equipment that complies with ISO 12176-1 and installed in accordance with ISO/TS 10839, relevant codes of practice,…

ISO 22093:2011 defines a neutral language for communication between information systems and dimensional measurement equipment (DME), called the Dimensional Measuring Interface Standard (DMIS). DMIS is an execution language for measurement part programs and provides an exchange format for metrology data such as features, tolerances, and measurement results. DMIS conveys the product and equipment…

ISO 5667-13:2011 gives guidance on the sampling of sludges from wastewater treatment works, water treatment works and industrial processes. It is applicable to all types of sludge arising from these works and also to sludges of similar characteristics, e.g. septic tank sludges. Guidance is also given on the design of sampling programmes and techniques for the collection of samples.

 ISO 10303-203:2011 specifies the application protocol for Configuration control 3d design ed2. The following are within the scope of ISO 10303-203:2011: products that are mechanical parts and assemblies; product definition data and configuration control data pertaining to the design phase of a product's…

ISO 10303-210:2011 specifies the use of ISO 10303 integrated resources that satisfy the information sharing requirements for design engineers, device design engineers, value added engineering data suppliers, design analysts, system engineers, fabrication planning engineers, interconnect fabrication design engineers, and manufacturing process planning engineers. The information is shared to…

IEC 61784-3-18:2011 specifies a safety communication layer (services and protocol) based on CPF 18 of IEC 61784-2 and IEC 61158 Type 22. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.

ISO 13043:2011 is restricted to refrigerant systems providing cooling or heating of passenger compartment, battery, etc., in passenger motor vehicles. It provides minimum design requirements for refrigerant containment and safety requirements of these systems. ISO 13043:2011 addresses the use of only R‑134a, R‑1234yf and R‑744 refrigerants in vehicle original equipment manufacturer (OEM) and…

L'ISO 14253-2:2011 donne des lignes directrices pour la mise en ?uvre du concept de «Guide pour l'estimation de l'incertitude de mesure» (en abrégé GUM), à appliquer dans l'industrie pour l'étalonnage d'étalons et d'équipements de mesure dans le domaine GPS et la mesure des caractéristiques GPS de pièces. L'objectif est de présenter des informations…

ISO 14253-2:2011 gives guidance on the implementation of the concept of the "Guide to the estimation of uncertainty in measurement" (in short GUM) to be applied in industry for the calibration of (measurement) standards and measuring equipment in the field of GPS and the measurement of workpiece GPS characteristics. The aim is to promote full information on how to achieve uncertainty…

IEC 62495:2011(E) is applicable to the radiological safety of portable handheld X-ray fluorescence (XRF) analysis equipment utilizing a miniature X-ray tube as the source of ionizing radiation for industrial applications. Establishes performance specifications for general radiation, electrical, safety and environmental characteristics of the design and operation, and test methods in relation to…