Rechercher

Le présent document fournit une méthode pour déterminer la tenue mécanique des conduites en acier en environnement corrosif. La présente méthode d'essai utilise une éprouvette d'essai à pleine échelle consistant en un court tronçon de tube (une « section circulaire »), fermé de façon étanche à chaque extrémité afin de contenir la solution d'essai corrosive. La méthode d'essai…

This document specifies a method for the measurement of effective focal spot dimensions above 0,1 mm of X-ray systems up to and including 1 000 kV X-ray voltage by means of the pinhole camera method with digital evaluation. The tube voltage applied for this measurement is restricted to 200 kV for visual film evaluation and can be selected higher than 200 kV if digital detectors are used. The…

ISO/IEC TS 30168:2024 specifies a generic programming interface for the integration of secure elements within Industrial IoT devices. This includes requirements from industrial usage scenarios and applications. This document also provides guidance for implementation and testing.

This document specifies requirements for defining structure and content for library objects to support project inception, brief, design, tendering, construction, operations, use and demolition, supporting the development of information throughout the process, in connection with building information modelling (BIM) and the organization of the objects into libraries. This document does the…

Scope This part of IEC 61400 applies to lightning protection of wind turbine generators and wind power systems. Refer to Annex M guidelines for small wind turbines. This document defines the lightning environment for wind turbines and risk assessment for wind turbines in that environment. It defines requirements for protection of blades, other structural components and electrical and control…

This document establishes a practice for the proximate analysis of coal and coke. It is intended for general utilization by the coal industry to provide a basis for comparison of coals and coke and for the determination of fixed carbon.

This document specifies the minimum requirements for lubricants for turbines, as delivered. It is intended to be used in conjunction with ISO 6743-5. This document specifies the requirements for a wide variety of lubricants for the lubrication of most types of turbines for power generation, including steam turbines, gas turbines, single shaft combined cycle turbines with common lubrication system…

Le présent document spécifie les fourchettes de composition d'une série de métaux d'apport utilisés pour le brasage fort. Les métaux d'apport sont divisés en sept classes, d'après leur composition, mais pas nécessairement d'après leur élément principal. NOTE 1        Pour l'élément (les éléments) principal (aux), voir l'Annexe A. En ce qui concerne les produits…

IEC 62057-3:2024 applies to an automatic meter testing system (AMTS) permanently installed in a controlled environment. It covers the functions, technical requirements and acceptance methods of an AMTS. It also applies to a newly manufactured AMTS to test static active or reactive energy meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral). This document defines…

IEC 61784-3:2021+AMD1:2024 CSV explains some common principles that can be used in the transmission of safety-relevant messages among participants within a distributed network which use fieldbus technology in accordance with the requirements of IEC 61508 (all parts) for functional safety. These principles are based on the black channel approach. They can be used in various industrial applications…