Rechercher

1 Scope The purpose of this part of ISO/TS 12901 is to describe the use of a control banding approach for controlling the risks associated with occupational exposures to nano-objects, and their aggregates and agglomerates greater than 100 nm (NOAA), even if knowledge regarding their toxicity and quantitative exposure estimations is limited or lacking. The ultimate purpose of control banding…

1.1 This Standard applies to fans and ventilation equipment that is a) cord-connected, rated at not more than 250 V; b) permanently-connected to supply circuits of 600 V and less, single-phase or three-phase; c) used in non-hazardous locations; d) used in household, commercial, agricultural, or industrial locations; e) used indoors or outdoors; and f) used in accordance with the…

ISO 17100:2015 provides requirements for the core processes, resources, and other aspects necessary for the delivery of a quality translation service that meets applicable specifications. Application of ISO 17100:2015 also provides the means by which a translation service provider (TSP) can demonstrate conformity of specified translation services to ISO 17100:2015 and the capability of its…

SCOPE This standard applies to industrial products and by-products intended for use as soil amendments consistent with agronomical or silvicultural principles, and that are derived from: a) the reaction of calcium carbide with water in the production of acetylene (products and by-products essentially containing hydrated lime [Ca(OH)2]); b) the dust collecting system of lime kilns; c) the…

IEC 60730-2-6:2015 applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard is also applicable to individual pressure sensing…

IEC PAS 62948:2015(E) specifies the system architecture and communication protocol of WIA-FA (Wireless Networks for Industrial Automation - Factory Automation) based on IEEE STD 802.11-2012 Physical Layer (PHY). It applies to wireless network systems for factory automation measuring, monitoring and control.

IEC PAS 62953:2015(E) provides common elements for basic time-critical messaging communications between devices in an automation environment. It defines the services provided to the Type 25 fieldbus: application layer at the boundary between the application and datalink layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of…

IEC 60730-2-6:2015 applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard is also applicable to individual pressure sensing…

IEC 60730-2-6:2015 s'applique aux dispositifs de commande électrique automatiques sensibles à la pression avec des caractéristiques assignées de pression minimales de -60 kPa et des caractéristiques assignées de pression maximales de 4,2 Mpa, destinés à être utilisés dans, sur ou avec des matériels. Les matériels peuvent utiliser l'électricité, le gaz, le pétrole, des combustibles…