Rechercher

ISO/IEC TR 18781:2015 gives guidance on the principles and methods of testing ID cards to simulate accidental exposure to conditions encountered during the washing and drying of clothing. The physical properties of a card may degrade after exposure and the test methods described may be useful for comparing different card materials or types. Although there are many variations in the design and…

1.1 This Standard applies to electric clothes washing machines and extractors intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I (CE Code), and the (U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V. Note: Wherever practical, for convenience, the term ²appliance² has been used in lieu of ²clothes…

This International Standard establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see 4.3). This International Standard covers people of 14 years and older (the…

This International Standard is a design qualification standard applicable to solar trackers for photovoltaic systems, but may be used for trackers in other solar applications. The standard defines test procedures for both key components and for the complete tracker system. In some cases, test procedures describe methods to measure and/or calculate parameters to be reported in the defined…

1.1 These requirements cover permanently installed devices, hereafter referred to as dimmers, that employ a dimming function intended for control of lighting loads of the magnetic ballast, transformer, electronic ballast, self-ballasted lamp, tungsten-filament type, or light-emitting-diode (LED), and are intended to be installed in a wallbox or are provided with an enclosure for flush or…

ISO 15494:2015 spécifie les caractéristiques et les exigences des composants tels que les tubes, les raccords et les robinets fabriqués à partir d'un des matériaux suivants et destinés à être utilisés dans les systèmes de canalisations en matières thermoplastiques dans le cadre d'applications industrielles aériennes et dans le sol: - polybutène (PB); - polyéthylène (PE…

ISO 15494:2015 specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for thermoplastics piping systems in the field of industrial applications above and below ground: - polybutene (PB); - polyethylene (PE); - polyethylene of raised temperature resistance (PE-RT); -…

ISO 16540:2015 provides guidelines for the use of four-point bend testing to evaluate the resistance of metals including carbon steel, low alloy steels, and corrosion resistant alloys (CRAs) to stress corrosion cracking. The method gives guidance on testing of both parent plate and welds and includes procedures for metals that have no distinct yield point in their stress-strain behaviour as well…

ISO 1126:2015 specifies methods for determining the loss on heating of carbon black for use in the rubber industry. This loss on heating is due primarily to loss of moisture, but traces of other volatile materials may also be lost. These methods are not applicable to treated carbon blacks which contain added volatile materials. One of the following three methods is used: - method 1: gravity-…

ISO 1126:2015 spécifie des méthodes de détermination de la perte à la chaleur du noir de carbone destiné à l'industrie du caoutchouc. Cette perte à la chaleur provient en majeure partie de l'humidité, mais elle peut également provenir d'autres matières volatiles. Ces méthodes ne sont pas applicables aux noirs de carbone traités qui contiennent des matières volatiles d'addition…