Rechercher

1.1 This Standard applies to newly produced gas food service equipment providing coverage for ranges and unit broilers, baking and roasting ovens, counter appliances, deep fat fryers, kettles, steam cookers, steam generators, tableside cooking appliances (see Clause 3, Definitions), hereinafter referred to as either (1) “appliances” constructed entirely of new, unused parts and materials for…

1.1 General This Standard specifies requirements for the management of hearing loss prevention programs (HLPPs) designed to protect individuals from occupational hearing loss. 1.2 Subjects addressed Following principles set out in CAN/CSA-Z1000, this Standard specifies requirements for a) management commitment, leadership, and participation; b) assignment of roles and responsibilities; c…

1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, and connectors and associated integrated accessories (i.e., junction box), rated up to 1,200 amperes (for single- and multi-pole) and above 750 V to 35 kV volts ac, 50/60 Hz and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

ISO/TS 19709-2:2015 specifies the main characteristics and the testing of durable, reusable, parallelepipedic containers and their accessories which form a column stackable system (CSS) designed to contain bulk or precisely located component loads up to maximum load of 20 kg used for automotive industry applications.

ISO 7503 (all parts) and ISO 8769 are addressed to the people responsible for determining the radioactivity present on solid surfaces. ISO 7503 is published in three parts and can be used jointly or separately according to needs. ISO 7503-1:2016 relates to the assessment of surface contamination by direct and indirect measurements and the calibration of the associated instrumentation. The…

ISO 19905-1:2016 specifies requirements and guidance for the site-specific assessment of independent leg jack‑up units for use in the petroleum and natural gas industries. It addresses: manned non-evacuated, manned evacuated and unmanned jack‑ups; the installed phase at a specific site. To ensure acceptable reliability, the provisions of this part of ISO 19905 form an integrated…

L'ISO 19905-1:2016 spécifie les exigences et les lignes directrices pour l'évaluation spécifique au site d'unités de plates‑formes élévatrices à jambes indépendantes à utiliser dans les industries du pétrole et du gaz naturel. Elle traite: des plates‑formes auto-élévatrices occupées par du personnel, non évacuées; occupées par du personnel, évacuées, et non occupées par du…

ISO 16891:2016 specifies a standard reference test method useful to assess the relative degradation characteristics of cleanable filter media for industrial applications under standardized simulated test conditions. The main purpose of testing is to obtain the information about relative change of properties of filter media due to exposure to the simulated gas conditions for a long time. The main…

ISO 22915-1:2016 series deals with the safety of industrial trucks, as defined in ISO 5053‑1, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled, or pedestrian-propelled vehicles excepting those running on rails. They are either operator-controlled or driverless, and are designed to carry, tow, push,…

ISO 28765:2016 establishes the requirements for the design and use of vitreous-enamel-coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges. It applies to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation. It applies where a) the tank is cylindrical and is…