Rechercher

This National Standard of Canada is based on International Standard CEI/IEC 730-2-12:1993 (first edition). NOTE - Amendment 1 reaffirmed 2006-03-29. 1 Scope This clause of Part 1 is replaced as follows: 1.1 This Part of International Standard IEC 730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use.…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-53:1988. 1. Scope This clause of Part 1 is applicable, except as follows: 1.1 Replacement: This standard applies to electric sauna heating appliances having a rated input not exceeding 20 kW. Sauna heaters may be of the thermal storage type or of the non…

Provides the user with a means of verifying the performance of typical liquid-scintillation courting systems.

This National Standard of Canada is equivalent to International Standard ISo 7665:1983. This Standard specifies requirements for the file structure and the labelling of flexible disk cartridges for the interchange of information between users of different information processing systems. This Standard specifies a) recorded labels to identify files, file sections, and volumes of flexible…

This National standard of Canada is equivalent to International standard ISO/IEC 9983:1989. This Standard specifies an identifier to appear on each flexible disk cartridge (FDC) and the minimum information to appear on packages of unrecorded flexible disk cartridges. The information according to this Standard shall appear on cartridges and on packages of unrecorded flexible disk…

1.1 This standard applies to a sealer for application to asbestos-contaning materials to prevent release of asbestos fibres from the materials. This sealer is not suitable for highly friable materials (Note 1). 1.2 This standard provides guidance to the user when selecting a specific type and class of sealer as described in par. 3.1. It does not address concerns with any change in…

1.1 This Standard provides minimum requirements for the training of operators for lift trucks Classes 1 to 7 inclusive. Note: Due to the different design of vehicles classified as "Class 6", certain Clauses in this Standard may not apply. 1.2 This Standard specifies the general medical and physical fitness requirements for lift truck operators as well as the basic knowledge…

Scope 1.1 This Standard describes procedures for the determination of the occupational noise exposure level (L ex,T) using sampling techniques. L ex,T represents the long-term noise exposure of employees. It is calculated from measurements of the equivalent sound level (L eq,t) in the workplace. The procedures in this Standard normally form part of any occupational hearing…

1.1 This Standard applies to (a) water for the preparation of dialysing fluid and concentrate for haemodialysis; (b) all water intended for contact with the dialysing fluid pathway; (c) baseline quality of the feed water and any other input water; (d) water treatment and monitoring equipment; (e) water distribution system; and (f) product water used for flushing blood pathways prior to…

This National Standard of Canada is based on International Standard ISO 8637:1989. 1 Scope This International Standard specifies requirements for haemodialysers, including those of coil, hollow fibre and parallel plate design, haemofilters and haemoconcentrators for single use for humans. Materials of construction and test methods for biocompatibility, validation of sterility, non-…