Rechercher

1 Scope 1.1 This Standard applies to shingles manufactured from eastern white cedar (Thuja occidentalis L.). It specifies minimum grading, manufacturing, packaging, labelling, and conformity assessment requirements. Note: See Annex A for a suggested conformity assessment program for use by third-party inspection and certification agencies and Annex B for recommendations on the use of shingles…

1 Scope 1.1 This Guideline specifies best practices for the proper selection, use, and care of high-visibility safety apparel. 1.2 This Guideline outlines the essential components necessary for the implementation of an effective high-visibility safety apparel program in the workplace. 1.3 This CSA Guideline contains advice for the users of high-visibility safety apparel, indicated by…

1 Scope 1.1 This Standard applies to single-phase electric tools of the bench type that are intended for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, and that are connected to a nominal system voltage of 240 V or less. 1.2 This Standard does not apply to (a) tools intended for industrial use; (b) tools covered by CSA C22.2 No. 73; (c) tools…

ISO 17372:2007 is applicable to the analysis of zearalenone in animal feed and feed ingredients, including barley, corn, oats, rye, wheat, soybean meal, canola (rapeseed) meal, corn gluten, dried distillers' grains, lentils, and sugar beet pulp. The limit of quantification is 0,05 mg/kg (50 µg/kg). A lower limit of quantification may be achievable subject to appropriate validation being…

This Publicly Available Specification (PAS) defines a methodology for power system domain experts to determine and describe their user requirements for automation systems, based on their utility business needs. This methodology was originally developed as part of the IntelliGrid Architecture developed by the Electrical Power Research Institute (EPRI), as a means to implement the "IntelliGrid…

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for ancillary apparatus are included for: antennas and test sites, TEM cells, and reverberating chambers. The requirements of this publication must be complied with at all…

ISO/IEC Guide 76:2008 provides general guidance on the issues to be considered in standards for services. On the basis of this guidance, detailed standards can be prepared for any service. ISO/IEC Guide 76:2008 provides a checklist which can be used by consumer representatives and others participating in the process of standards development. Use of the checklist enables full consideration to be…

ISO/IEC Guide 76:2008 provides general guidance on the issues to be considered in standards for services. On the basis of this guidance, detailed standards can be prepared for any service. ISO/IEC Guide 76:2008 provides a checklist which can be used by consumer representatives and others participating in the process of standards development. Use of the checklist enables full consideration to be…

This CSA Standard is based on ASTM D 1970-01. 1. Scope 1.1 This specification covers polymer modified bituminous sheet materials intended for use as underlayment on roof eaves, or valleys, or both, to prevent leakage of shingle, tile, or metal roofs from water back-up due to ice dams. 1.2 These underlayment sheets have a sticky adhesive layer which is exposed by removal of a protective…

Preface This is the second edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS - North American fenestration Standard/Specification for windows, doors, and skylights. It supersedes the previous edition, published in 2005 under the title Standard/Specification for windows, doors, and unit skylights. It is jointly published by the American Architectural Manufacturers Association (AAMA), the Window…