Rechercher

Scope 1.1 This Standard deals with new protective footwear and includes requirements for two grades of toe impact resistance, as well as special requirements for sole plate performance, metatarsal protection, electric-shock protection, sole flex durability, conductivity, and chainsaw protection. (See Figures 1 and 2 for footwear and foot nomenclature used in this Standard.) 1.2 This Standard…

Scope 1.1 This Standard applies to multiple-conductor control and instrumentation cables (including thermocouple cables and thermocouple extension cables) having a voltage rating not exceeding 1000 V and intended for installation in accordance with the Canadian Electrical Code, Part I. Note: The designations for such cables are "CIC" for unarmoured cables and "ACIC" for…

Scope 1.1 This Standard applies to open-type (fused and solid-blade) cutouts with a polymeric insulator structure component. These cutouts are intended for operation on alternating current distribution systems. 1.2 In some cases, specific types of construction are envisaged. This does not preclude the use of other types of construction, provided that the engineering representatives…

Scope 1.1 This Standard applies to the design, manufacture, installation, operation, inspection, testing, and maintenance of concrete pumps, placing booms, and delivery systems. Note: See Figures 1 to 6 for illustrations of the equipment covered by this Standard. 1.2 This Standard does not apply to belt-conveying machines, mortar-spraying machines, and dry-mix shotcreting machines. 1.3 In CSA…

Scope 1.1 This Standard describes testing procedures and states the performance requirements for general service incandescent and tungsten halogen reflector lamps. 1.2 This Standard includes performance requirements for (a) wattage; (b) lamp efficacy; (c) rated luminous flux; (d) centre beam intensity; and (e) rated life. 1.3 This Standard applies to incandescent and tungsten halogen reflector…

IEC 61156-1:2009, consolidated version, consists of the third edition (2007) and its amendment 1 (2009). The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. It bears the edition number 3.1 The contents of the corrigendum of August 2015 have been included in this copy.

IEC 60893-3-5:2003+A1:2009 Gives the requirements for industrial rigid laminated sheets for electrical purposes based on polyester resins and different reinforcements. Applications and distinguishing properties are given. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based…

IEC/TR 60919-3:2009 provides general guidance on the dynamic performance of high-voltage direct current (HVDC) systems. Dynamic performance is meant to include those events and phenomena whose characteristic frequencies or time domain cover the range between transient conditions and steady state. Diode valves are not considered in this specification. This report (IEC 60919-3) which covers dynamic…

ISO/IEC 26513:2009 supports the interest of software users in receiving consistent, complete, accurate, and usable documentation. It defines the process in which user documentation products are tested. ISO/IEC 26513:2009 is intended neither to encourage nor discourage the use of either printed or electronic (on-screen) media for documentation, or of any particular documentation testing or…

ISO/IEC 26513:2009 supports the interest of software users in receiving consistent, complete, accurate, and usable documentation. It defines the process in which user documentation products are tested. ISO/IEC 26513:2009 is intended neither to encourage nor discourage the use of either printed or electronic (on-screen) media for documentation, or of any particular documentation testing or…