Rechercher

Scope 1.1 This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for the connection of wiring designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 These terminal blocks are intended to…

Scope 1.1 This Standard applies to the lines and equipment associated with underground electric supply and communication systems located entirely outside buildings and fenced supply stations. See CAN/CSA-C22.3 No. 61936-1 for installations within fenced or indoor supply stations. 1.2 Existing installations, including maintenance replacements, additions, and alterations, meeting the original…

Scope 1.1 This Standard applies to cord-connected and permanently connected cooking and liquid-heating appliances* rated for use on nominal single-phase system voltages of 240 V and less and designed to be used in nonhazardous locations in household and similar applications in accordance with the Rules of the Canadian Electrical Code, Part I. *The abbreviated term "appliance" is…

Scope 1.1 This Standard specifies the test methods and marking requirements, and references energy efficiency levels for three-phase induction motors. Note: The test methods contained in this Standard are not limited to specific types of motors, but where this Standard is referenced in regional legislation, some specific motor types might be included or excluded from the regulations.…

Scope 1.1 This Standard covers the manufacturing process requirements of fibre-reinforced polymer (FRP) bars or bars that are part of a grid for use in non-prestressed internal reinforcement of concrete components of structures (e.g., bridges, buildings, and marine structures). 1.2 This Standard covers FRPs comprised of (a) glass, carbon, or aramid fibres; and (b) isophthalic polyester…

This Standard is based on the requirements of Canadian Electricity Association (CEA) LWIWG-01 (96), Dead-End/Suspension Composite Insulator for Overhead Distribution Lines (used with permission from CEA). 1 Scope 1.1 This Standard covers the requirements for dead-end/suspension composite insulators used on overhead distribution lines operating at nominal voltages up to and including 75 kV. Dead…

ISO 21072-3:2010 specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with high viscosity, so the end user can objectively judge, compare and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to…

ISO/TR 12603:2010 classifies machinery and equipment used in the building and construction industry into three hierarchical levels, nine groups and into subgroups. It covers machines and equipment employed in the majority of works in the field, classified according to their specified use. In as far as possible, and where existent, International Standards corresponding to subgroups are specified.…

ISO 22745-11:2010 provides guidelines that are recommended for the development of terminology for concepts in an open technical dictionary (OTD). Compliance with these guidelines is not required in order for a term or definition to be included in an OTD. These guidelines are provided as a framework for developers of industrial terminology to ensure that definitions are consistent and…

IEC 60832-1:2010 gives the essential requirements for insulating sticks for live working for use on a.c. electrical installations. The products designed and manufactured according to this standard contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use. IEC 60832-1:2010 and IEC 60832-2:2010 cancel and…