Rechercher

ISO 4513:2010 establishes the location of drivers' eyes inside a vehicle. Elliptical (eyellipse) models in three dimensions are used to represent tangent cut-off percentiles of driver eye locations. Procedures are provided to construct 95th and 99th percentile tangent cut-off eyellipses for a 50/50 gender mix, adult user population. Neck pivot, P, points are defined to establish specific…

Preface This is the first edition of the CSA Z245.20 Series, Plant-applied external coatings for steel pipe, which consists of the sixth edition of CSA Z245.20, Plant-applied external fusion bond epoxy coating for steel pipe, the fifth edition of CSA Z245.21, Plant-applied external polyethylene coating for steel pipe, and the first edition of CSA Z245.22, Plant-applied external polyurethane foam…

Scope 1.1 This Standard describes the investigations required to obtain the seismological and geological information necessary to determine, for a proposed or existing nuclear power plant site, the seismic ground motion that will be used in seismic qualification of safety-related plant structures and systems, and the potential for seismically induced phenomena that can have a direct or…

Scope 1.1 This Standard specifies the requirements, criteria, and methods of analysis for (a) determining the design response spectra and ground motion time-histories to be used in the analysis; (b) establishing design criteria for SSCs, and supports that require seismic qualification; and (c) performing seismic analyses, including the effects of the soil-structure-interaction. 1.2…

Scope 1.1 Facilities 1.1.1 Types of facilities 1.1.1.1 This Standard addresses the design and operation of EMPs for Class I nuclear facilities and uranium mines and mills. These facilities include (a) nuclear reactors; (b) uranium mines, mills, refineries, and conversion plants; (c) uranium fuel fabrication plants; (d) isotope-processing facilities; (e) particle accelerators; and…

Scope 1.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are (a) Method 1: mechanically attached membrane-roofing systems; and (b) Method 2: adhered membrane-roofing systems. The roofing system consists of a deck and roofing membrane. It includes components such as vapour barriers or retarders,…

1 Scope 1.1 This Standard defines essential elements for the selection, use, and maintenance of rigid sterilization containers. The selection criteria include minimum construction and performance requirements to help health care facilities choose products that are appropriate for their intended use. 1.2 This Standard applies to the following types of rigid sterilization containers: (a)…

1 Scope 1.1 This Standard covers the electrical and mechanical characteristics of (a) round 1350 aluminum wires used before compacting in the construction of conductors; and (b) bare compact round aluminum stranded conductors (compact round ASC) constructed from the wires specified in Item (a). 1.2 The following classifications apply to those conductors covered by this Standard: (a) Class AA:…

IEC 61508-1:2010 covers those aspects to be considered when electrical/electronic/programmable electronic (E/E/PE) systems are used to carry out safety functions. A major objective of this standard is to facilitate the development of product and application sector international standards by the technical committees responsible for the product or application sector. This will allow all the…

IEC 61508-1:2010 covers those aspects to be considered when electrical/electronic/programmable electronic (E/E/PE) systems are used to carry out safety functions. A major objective of this standard is to facilitate the development of product and application sector international standards by the technical committees responsible for the product or application sector. This will allow all the…