Rechercher

This international standard is intended to provide a protocol for the interlab validation of methods for the characterization of sludge/biosolids physical properties considered that in most cases fresh sludge samples cannot be circulated to several laboratories in different countries for validation purposes as uncontrolled variations of their characteristics would occur.

This international standard specifies a chemical conditioning procedure for sludge/biosolids thus allowing results obtained in different places and laboratories, and on different times to be compared when selecting type and dosage of a conditioning product at laboratory scale.

This document defines the crypto suite for SPECK for the ISO/IEC 18000 air interfaces standards for radio frequency identification (RFID) devices. Its purpose is to provide a common crypto suite for security for RFID devices that can be referred to by ISO committees for air interface standards and application standards. The crypto suite is defined in alignment with existing air interfaces. SPECK…

This document defines the crypto suite for SIMON for the ISO/IEC 18000 air interfaces standards for radio frequency identification (RFID) devices. Its purpose is to provide a common crypto suite for security for RFID devices that can be referred by ISO committees for air interface standards and application standards. The crypto suite is defined in alignment with existing air interfaces. SIMON is…

This International standard specifies requirements for dried lime (Citrus aurantifolia – Christm. – Swingle, Citrus latifolia Tanaka, family Rutaceae) in whole, slices and ground form. The term "Dried Lime" includes dehydrated lime by sun and/or artificially dried.  Recommendation relating to storage and transport conditions is given in the annex A.

ISO/IEC 80079-34:2018 specifies particular requirements and information for establishing and maintaining a quality management system to manufacture Ex Products in accordance with the certificates. While it does not preclude the use of other quality management systems that are compatible with the objectives of ISO 9001:2015 and which provide equivalent results, the minimum requirements are given…

This document provides principles and guidance for developing normative documents that contain: specified requirements for objects of conformity assessment to fulfil; specified requirements for conformity assessment systems that can be employed when demonstrating whether an object of conformity assessment fulfils specified requirements. This document is intended for use by standards developers…

This document supports the interest of system users in having consistent, complete, accurate, and usable information. It addresses both available approaches to standardization: a) process standards, which specify the way that information products are to be acquired and supplied; and b) information product standards, which specify the characteristics and functional requirements of the information…

The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of a test piece cut from the wall of a pipe or fitting while the temperature is raised at a constant rate. Is applicable only to thermoplastics materials for which it is possible to measure the temperature at which the rate of softening becomes…

This standard is intended for the simultaneous analysis of multi-class pesticide residues in soil using GC-MS/MS and LC-MS/MS analysis following the extraction with buffering salts mixture and clean up with the dispersive-soild phase extraction(d-SPE). The number of target analytes is 30(16 of fungicides, 6 of herbicides and 8 of insecticides). This document can be applied to other pesticide…