Rechercher

ISO 14908-3:2011 specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems used in conjunction with ISO 14908-1. ISO 14908-3:2011 establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the…

ISO 21220:2008 refers to particulate air filters for general ventilation. It describes testing methods and the test rig for measuring filter performance. The test rig is designed for an air flow rate between 0,25 m3/s (900 m3/h, 530 ft3/min) and 1,5 m3/s (5 400 m3/h, 3 178 ft3/min). ISO 21220:2008 applies to air filters having an initial efficiency of less than 99 % with respect to 0,4 �m…

This International Standard gives a procedure for the prediction by near infrared spectroscopy of constituents such as moisture, fat and protein and some minor parameters such as total glucosinolates in oilseeds and oilseeds meals. The determinations are based on spectrometric measurement in the near infrared spectral region.

ISO 10993-7:2008 specifies allowable limits for residual ethylene oxide (EO) and ethylene chlorohydrin (ECH) in individual EO-sterilized medical devices, procedures for the measurement of EO and ECH, and methods for determining compliance so that devices may be released. Additional background, including guidance and a flowchart showing how the standard is applied are also included in informative…

This document specifies personnel qualification criteria for the theoretical and practical assessment of designers covering multiple metal Additive Manufacturing (AM) processes. The activities and procedures foreseen to be performed by the designer are also part of the standard. This document is intended to provide guidance for qualification designers in general industrial applications.

The purpose of the proposed standard is to provide requirements and guidance for methods for generation, change, and verification of PINs using 16-byte block ciphers such as AES. Outline The following table of contents expresses the intended direction of the work effort, but would be anticipated to change as the work progresses: Foreword Introduction 1 Scope 2 Normative References ISO 13491,…

ISO 24490:2016 specifies the minimum requirements for the design, manufacture and testing of centrifugal pumps for cryogenic service. ISO 24490:2016 does not apply to reciprocating pumps. This International Standard also gives guidance on the design of installations (see Annex A). It does not specify requirements for operation or maintenance. NOTE For general requirements for materials used in…

This standard specifies a test method for determining the resistance to water leakage and penetration of water resistant clothing in an artificial rainfall by means of a manikin capable of marching motion. It becomes effective for determining the waterproof characteristic in practical use in a rainfall environment with the wearer moving. It is applicable to the testing of waterproof or water…

This standard specifies classification, structure and symbol, design requirement, testing and inspection methods, marking of marine combined connecting mooring line (hereinafter referred to as combined line). This standard applies to design, manufacture and inspection of combined line for tanker, combined line used in others types of ships can selected by reference.