Rechercher

This CSA Standard is a Harminized Standard with ANSI Z21.75-2001. Part I: Construction 1.1 Scope 1.1.1 This standard applies to newly produced assembled connectors constructed entirely of new, unused parts and materials. Such connectors are intended for exterior use above ground for making the following nonrigid connections: a. Between the gas supply and the gas…

1. Scope 1.1 The purpose of this Standard is to define accessibility requirements for automated banking machines (ABMs) and ABM sites. Note: While the purpose of the Standard is to make the product or environment more usable, there may be some people with disabilities who have requirements beyond the level described in this Standard. 1.2 This Standard describes technical requirements that…

Specifies general and testing requirements for electrical resistance trace heaters for application in explosive gas atmospheres. The standard covers trace heaters that may comprise either factory- or field- (work-site) assembled units, and which may be series heating cables, parallel heating cables or heating pads and heating panels that have been assembled and/or terminated in accordance with…

Spécifie les règles générales et d'essais des résistances électriques de traçage en atmosphères explosives gazeuses. La norme s'applique aux résis-tances de traçage qui peuvent comprendre les unités assemblées sur site (site d'exploitation) ou en usine et qui peuvent être soit des câbles de traçage en série, soit des câbles de traçage en parallèle, soit des bandes ou des panneaux…

1. Scope 1.1 This Standard provides requirements for the installation of, alteration to, and maintenance of solid-fuel-burning appliances and equipment intended to supply heat to air or water or for cooking. Note: Recommendations for the storage of solid fuel and of ash are included in Annex A. 1.2 For the purpose of this Standard, solid-fuel-burning appliances include (a) furnaces; (…

1. Scope 1.1 This Standard covers the procedure for certification of factory-built houses, including modular, panelized, and mobile homes. It provides for (a) certification of the plant quality program; (b) certification of the product built; (c) auditing of the plant quality program; and (d) in-plant inspection of the product built. 1.2 This Standard does not cover those portions…

1. Scope 1.1 This Standard specifies (a) requirements for the performance testing of solidappliances having an air-fuel ratio averaging less than 35:1 as determined by Clause 16; and (b) maximum emission rates. 1.2 This Standard specifies a method for determining (a) heat outputs; (b) appliance efficiencies; (c) emission levels and composition; and (d) flue…

1. SCOPe 1.1 These requirements cover single and double wall cylindrical horizontal steel non-pressure tanks that are used for the aboveground storage of flammable and combustible liquids with a relative density not greater than 1.0, such as gasoline, fuel oil, or similar products. 1.2 Section 3 of these requirements covers single wall tanks. 1.3 Section 4 of these requirements covers double…

La présente Norme internationale spécifie un mode opératoire permettant de mesurer la capacité d'un moteur à vitesse élevée ou à vitesse moyenne à générer des vibrations et de déterminer les fréquences limites de validité des informations données. La méthode décrite dans la présente Norme internationale n'est pas appropriée aux moteurs à faible vitesse. La présente Norme internationale…