Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum ...
Deals with the safety of electric vacuum cleaners and water-suction cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being not more than 250 V. Also applies to centrally-sited vacuum cleaners, motorized cleaning heads and current-carrying hoses associated with a particular vacuum cleaner. Does not cover industrial…
Electrical installations of buildings - Part 7-703: Requirements for special installations or locati...
The particular requirements of this part of IEC 60364 apply to: - sauna cabins erected on site, e.g. in a location or in a room; - the room where the sauna heater is, or the sauna heating appliances are installed. In this case the whole room is considered as the sauna. They do not apply to prefabricated sauna cabins complying with a relevant equipment standard. Where facilities like cold water…
Matériel de perfusion à usage médical — Partie 10: Accessoires de tubulures pour utilisation avec de...
L'ISO 8536-10:2004 s'applique aux accessoires à usage unique stériles des tubulures et appareils de perfusion sous pression spécifiés dans l'ISO 8536-8.
L'ISO 8536-10:2004 traite des éléments suivants:
les robinets à deux (2SC), trois (3SC), quatre (4SC) voies et les rampes de robinets (SM). La désignation d'un robinet dépend du nombre de raccordements. Le nombre de…
Infusion equipment for medical use — Part 10: Accessories for fluid lines for use with pressure infu...
ISO 8536-10:2004 applies to sterilized accessories for single use in fluid lines and pressure infusion equipment as specified in ISO 8536-8.
ISO 8536-10:2004 includes:
Two-way stopcocks (2SC), three-way stopcocks (3SC), four-way stopcocks (4SC) and stopcocks manifold (SM). Designation of a stopcock depends on the number of connections. The number of possible functional positions can be expressed…
Mechanical vibration — Criteria and safeguards for the in-situ balancing of medium and large rotors
ISO 20806:2004 specifies procedures to be adopted when balancing medium and large rotors installed in their own bearings on site. It addresses the conditions under which it is appropriate to undertake in-situ balancing, the instrumentation required, the safety implications and the requirements for reporting and maintaining records.
ISO 20806:2004 can be used as a basis for a contract to undertake…
Sélection et utilisation des contenants de stérilisation rigides
1 Domaine d'application
1.1
Cette norme définit les points essentiels pour la sélection, l'utilisation et l'entretien des contenants de stérilisation rigides. Les critères de sélection sont notamment des exigences minimales relatives à la construction et à la performance, qui sont destinées à aider les établissements de santé à choisir des produits appropriés à l'utilisation…
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part...
ISO 14839-2:2004 sets out general guidelines for measuring and evaluating rotating machinery equipped with active magnetic bearings (AMBs) with respect to the following two indices: shaft vibratory displacement measured at or close to the AMBs; and working current and voltage measured in magnetic coils or power supply amplifiers.
Both indices are measured under nominal operating conditions in…
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions —...
ISO 13347-2:2004 gives a detailed description of reverberant room methods for the determination of fan sound power levels. It is for use under standardized laboratory conditions and recognises that tests in situ are subject to increased uncertainty. These test procedures are not necessarily appropriate to site test conditions. Acoustic system effects are presently the subject of considerable…
Ventilateurs industriels — Détermination des niveaux de puissance acoustique des ventilateurs dans d...
L'ISO 13347-2:2004 établit une description détaillée des méthodes en salle réverbérante pour la détermination des niveaux de puissance acoustique des ventilateurs. Elle est destinée à une utilisation dans des conditions de laboratoire normalisées, étant entendu que les essais sur site sont sujets à une incertitude accrue. Un tel mode opératoire d'essai n'est pas nécessairement…
1 Scope
1.1 General
This Standard addresses the geotechnical engineering aspects of
(a) gravity-base structures;
(b) fill structures;
(c) fill-retention structures; and
(d) pile-supported structures.
Specific considerations include site investigations, general design principles, the influences of soil and natural processes on the foundation components, and the geotechnical factors that affect…
