Rechercher

Preface This is the first edition of AAMA/WDMA/CSA 101/I.S.2/A440-05, Standard/Specification for windows, doors, and unit skylights, jointly published by the American Architectural Manufacturers Association (AAMA), the Window & Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA). 1 Scope 1.1 General This fenestration Standard/Specification applies to both…

SCOPE This Standard outlines requirements for the installation of spray applied rigid polyurethane foam, medium density. The material can be installed as thermal insulation, air barrier, vapour barrier or any combination of these three applications. The application requirements are for the installation of spray applied rigid polyurethane cellular plastic whether applied on a building site or…

1. SCOPE 1.1 This Standard specifies the requirements and test methods for bead-applied one component polyurethane foam used as an insulating air sealant for both building and nonbuilding applications. This Standard covers bead-applied one-component polyurethane air sealant foam whether applied on a building site or in a prefabrication (manufacturing) process. The one-component…

S'applique aux appareils électriques et électroniques destinés à être utilisés dans des environnements industriels, tels qu'ils sont décrits ci-dessous. Cette partie couvre les exigences d'immunité dans la gamme de fréquences de 0 kHz à 400 GHz. Il n'est pas nécessaire de réaliser des essais aux fréquences pour lesquelles aucune exigence n'est spécifiée. Cette norme…

deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans.It provides specifically for the safety of the system, personnel working on it, subscribers and subscriber equipment. It deals only with safety aspects and is not intended to define a standard for the…

L'ISO/IEEE 11073-30200:2004 est un réseau local (LAN) connecté par câble et basé sur le protocole IrDa pour l'interconnexion d'ordinateurs et de dispositifs médicaux. La présente norme est adaptée aux nouvelles conceptions de dispositifs, mais cible en particulier les modifications apportées aux dispositifs existants. L'expression «dispositifs existants» désigne les…

The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site. The RapidIO architecture was developed to address the need for a high-performance low pin count packet-switched system level interconnect to be used in a variety of applications as an open standard. The architecture is targeted toward networking, telecom,…

defines a model for general and site recipes; the activities that describe the use of general and site recipes within a company and across companies; a representation of general and site recipes; and a data model of general and site recipes.

L'ISO 18893:2004 s'applique à toutes les plates-formes élévatrices mobiles de personnel (PEMP) permettant d'amener sur les sites de travail les personnes ainsi que l'outillage et les matériaux nécessaires et qui consistent au minimum en une plate-forme de travail avec commandes, une structure extensible et un châssis. Les objectifs de l'ISO 18893:2004 sont la prévention…

ISO 19901-2:2004 contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included. The requirements are applicable to fixed steel structures and fixed concrete structures. The effects of seismic events on floating structures and partially buoyant structures are also briefly discussed. The site-specific assessment of…