Rechercher

IEC 60728-11:2010(E) deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. Additional requirements may be applied. It is intended to provide specifically for the safety of the system, personnel working on it, subscribers and subscriber equipment. It deals only…

ISO 9533:2010 specifies a static test method for determining the sound output performance and alarm activation requirements of audible travel alarms and forward horns mounted on earth-moving machinery, as defined in ISO 6165, for operation on work sites and travelling on public roads. It offers objective test methodologies and performance criteria. It is applicable only to those alarms and horns…

CISPR 18-2:2010(E), which is a technical report, applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception. The frequency range covered is 0,15 MHz to 300 MHz. A general procedure for establishing the limits of the radio noise field from the power lines and equipment is recommended, together with typical values as examples, and…

ISO 21931-1:2010 provides a general framework for improving the quality and comparability of methods for assessing the environmental performance of buildings and their related external works. It identifies and describes issues to be taken into account in the use and development of methods of assessment of the environmental performance for new or existing buildings in their design, construction,…

1 INTRODUCTION TO THE GUIDELINE 1.1 Need for this Guideline Engineering projects in the North often encounter permafrost in their foundation environment. The ability of frozen ground to support these structures depends mostly on local climatic conditions, ground temperatures, soil/rock material properties, and ground ice conditions. Since significant climate warming is anticipated in…

La CEI 61207-1:2010 comprend la terminologie, les définitions, les exigences de déclarations des fabricants ainsi que les essais communs à tous les analyseurs de gaz. Elle s'applique aux analyseurs spécifiés pour installation permanente en tout emplacement (à l'intérieur comme à l'extérieur) et aux analyseurs tels que ceux utilisant soit un système de manipulation des échantillons…

The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site.

Scope 1.1 This Standard describes the investigations required to obtain the seismological and geological information necessary to determine, for a proposed or existing nuclear power plant site, the seismic ground motion that will be used in seismic qualification of safety-related plant structures and systems, and the potential for seismically induced phenomena that can have a direct or…

Scope 1.1 Facilities 1.1.1 Types of facilities 1.1.1.1 This Standard addresses the design and operation of EMPs for Class I nuclear facilities and uranium mines and mills. These facilities include (a) nuclear reactors; (b) uranium mines, mills, refineries, and conversion plants; (c) uranium fuel fabrication plants; (d) isotope-processing facilities; (e) particle accelerators; and…

1 Scope 1.1 This Standard defines essential elements for the selection, use, and maintenance of rigid sterilization containers. The selection criteria include minimum construction and performance requirements to help health care facilities choose products that are appropriate for their intended use. 1.2 This Standard applies to the following types of rigid sterilization containers: (a)…