Rechercher

This document specifies dimensional requirements relating to test specimens prepared from plastics materials intended for processing by moulding, as well as to test specimens prepared by machining from sheets or shaped articles. It compiles the designations and dimensions of test specimens used for the acquisition of comparable data and also of other frequently used specimens. The following types…

This document provides standard procedures for the collection, handling and storage of soil for subsequent biological testing under aerobic conditions in the laboratory. It applies to the collection, handling and storage for assessing the effects of soil on microorganisms, invertebrates (e.g. survival, reproduction, growth, behaviour) and plants (e.g. development, growth). This document is not…

This document provides voluntary performance targets for cookstoves and is intended to supplement ISO 19867-1. These voluntary performance targets are intended for use with the results of the laboratory testing specified in ISO 19867-1. These voluntary performance targets are provided as informative guidance, and are not intended as normative requirements for the testing of cookstoves.…

This document illustrates the formulae and templates necessary to calculate the various pipe properties given in International Standards, including — pipe performance properties, such as axial strength, internal pressure resistance and collapse resistance, — minimum physical properties, — product assembly force (torque), — product test pressures, —…

This document specifies a method for the enumeration of Pseudomonas aeruginosa in water. The method is based on the growth of target organisms in a liquid medium and calculation of the most probable number (MPN) of organisms by reference to MPN tables. This document is applicable to a range of types of water. For example, hospital waters, drinking water and non‑carbonated bottled waters intended…

IEC 61010-031:2015+A1:2018 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies are for direct electrical connection between a part and electrical test and measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. It has the status of a…

IEC 61010-031:2015+A1:2018 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies are for direct electrical connection between a part and electrical test and measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. It has the status of a…

This document describes procedures to characterize quadrupole mass spectrometers (QMSs) with an ion source of electron impact ionization and which are designed for the measurement of atomic mass-to-charge ratios m/z < 300. This document is not applicable to QMSs with other ion sources, such as chemical ionization, photo-ionization or field ionization sources and for the measurements of higher…

ISO 16332:2018 specifies a fuel/water separator comparison test under defined and simplified laboratory conditions. This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout. The rated flow…

IEC TS 62257-8-1:2018(E) proposes simple, cheap, comparative tests in order to discriminate easily, in a panel of automotive flooded lead-acid batteries, the most acceptable model for PV individual electrification systems. It could be particularly useful for project implementers to test in laboratories of developing countries, the capability of locally made car or truck batteries to be used for…