Rechercher

Specifies methods for exposing to a carbon-arc light source under controlled environmental conditions. The procedure may include measurements of the irradiance and radiant exposure at the surface of the specimen. It is recommended that a similar material of known behaviour be exposed simultaneously with the experimental material as a reference. General guidance is given in ISO 4892-1.

Specifies methods for exposing to a xenon-arc light source under controlled environmental conditions. The procedure may include measurements of the irradiance and radiant exposure at the surface of the specimen. It is recommended that a similar material of known behaviour be exposed simultaneously with the experimental material as a reference. A xenon arc, when fitted with suitable filters,…

This National Standard of Canada is based on International Standard IEC 1010-2-010:1992. 1. Scope and Object This clause of Part 1 is applicable except as follows: 1.1 Scope: This part 2 applies only to electrical powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment. 1.1.2…

This National Standard of Canada is based on International Standard IEC 1010-2-020:1992. 1. Scope and Object This clause of Part 1 is applicable except as follows: 1.1 Scope This Particular Standard specifies requirements for the safety of electrically powered laboratory centrifuges designed to be installed and used in accordance with the Rules of the Canadian Electr ical Code,…

This National Standard of Canada is based on International Standard IEC 1010-2-031:1993. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…

This National Standard of Canada is equivalent to International Standard ISO 9919:1992. 1.1 Scope ISO 9919 is one of a series of International Standards based on IEC 601-1; in IEC 601-1 (the General Standard), this type of International Standard is referred to as a Particular Standard. As stated in 1.3 of IEC 601-1:1988, the requirements of this International Standard take precedence…

This National Standard of Canada is equivalent to International Standard ISO 5007:1989. This Standard specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an agricultural tractor. Vibration which reaches the operator other than through his seat, for example that sensed by his feet on…

This National standard of Canada is equivalent to International Standard ISO 7096:1982. 1. Scope This Standard specifies a method for the measurement, evaluation and acceptance level of the whole body vibration transmitted through the seat to the operator during laboratory simulated machine vertical vibration. 2. Field of application This Standard is applicable to seats fitted to…

1. Scope 1.1 General This Standard specifies requirements for mortar for use in bedding, jointing and bonding of masonry units, or other structural units, and for grout for use in filling core or cavity space, or both, in unit masonry construction. Note: The term "unit masonry" refers to masonry construction using clay or shale masonry units, sand-lime masonry units, or…

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.11-1991. 1.1 This standard establishes requirements for Cabinet Locks used on doors, drawers and furniture. Cycle tests, operational tests, strength tests and finish tests are included. 1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results…