Electrical equipment for measurement, control and laboratory use - EMC requirements
Specifies minimum requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply of less than 1000 V a.c. or 1500 V d.c., intended for professional, industrial process and educational use, including equipment and computing devices.
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-042: 1997.
1 Scope and object
This clause of part 1 is applicable except as follows:
1.1 Scope
Replacement:
This standard applies to AUTOCLAVES and STERILIZERS, including those with an
automatic loading and unloading system, which incorporate a CHAMBER using toxic
gas intended for the treatment of…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-043: 1997.
1. Scope and Object
This clause of part 1 is applicable except as follows:
1.1 Scope Replacement:
This standard applies to STERILIZERS, including those having an automatic loading and unloading system, with one or more C HAMBERS operating at approximately atmospheric pressure and using…
CAN/CSA-A5-98 Portland Cement
1. Scope
1.1 Scope
This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage.
1.2 Types
The five types of Portland cement covered in this Standard are identified as follows:
Type…
Oxygen monitors for monitoring patient breathing mixtures - Safety requirements
The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis.
This National Standard of Canada is equivalent to International Standard ISO 7767:1997.
1.1 Scope
ISO 7767 is one of a series of International Standards based on IEC 601-1 (the
"General Standard").…
This National Standard of Canada is equivalent to International Standard ISO 11196:1995.
1.1 Scope
NOTE 1 See the rationale in annex N.
ISO 11196 is one of a series of International Standards based on IEC 601-1; in
IEC 601-1 (the "General Standard"), this type of International Standard is
referred to as a "Particular Standard". As stated in 1.3 of IEC 601-1:1988,…
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -...
IEC 61300-3-40:1998 describes the procedure to measure the ability of an optical fibre connector to maintain a given extinction ratio across the connection in pm fibre. In this test we limit the measurement to the most common case of nearly linearly polarized light propagating in pm fibre. The term "extinction ratio" used here refers to the proportion of light propagating in the two…
