STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF FLOORING, FLOOR COVERINGS, AND MISCEL...
1 SCOPE
1.1 This Standard is applicable to the finished surface or covering of a floor extending to a maximum
depth of 65 mm. This method is also applicable to the following:
A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102, Standard
Method of Test for Surface Burning Characteristics of Building Materials and Assemblies,
without the use of supporting material…
STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES
1 SCOPE
1.1 This method of test for surface burning characteristics of building materials is applicable to any type
of building material that, by its own structural qualities or the manner in which it is applied, is capable of
supporting itself in position or may be supported in the test furnace as described in this Standard (see
Appendix A) or in a manner comparable to its recommended use.…
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031:...
IEC 61010-031:2015+A1:2018 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies are for direct electrical connection between a part and electrical test and measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. It has the status of a…
Protective clothing for firefighters — Physiological impact — Part 1: Measurement of coupled heat an...
This document provides a test method for evaluating the physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a series of simulated activities (phases) under defined ambient conditions. This standard test method characterizes the essential properties of fabric assemblies of a representative garment or clothing ensemble for thermo-physiological…
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031:...
IEC 61010-031:2015+A1:2018 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies are for direct electrical connection between a part and electrical test and measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. It has the status of a…
Protective clothing for firefighters — Physiological impact — Part 2: Determination of physiological...
This document specifies a method for evaluating the thermo-physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a simulated activity under defined relevant conditions for firefighters.
This document is intended to be used to assess the thermo-physiological impact of protective fabric ensembles and potentially protective clothing ensembles but not…
Vacuum technology — Vacuum gauges — Characterization of quadrupole mass spectrometers for partial pr...
This document describes procedures to characterize quadrupole mass spectrometers (QMSs) with an ion source of electron impact ionization and which are designed for the measurement of atomic mass-to-charge ratios m/z < 300.
This document is not applicable to QMSs with other ion sources, such as chemical ionization, photo-ionization or field ionization sources and for the measurements of higher…
Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuri...
ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required…
