Rechercher

IEC GUIDE 115:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC Guide 115:2021 presents a practical approach to the application of uncertainty of measurement to conformity…

IEC 60335-2-34:2021 deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when…

This document establishes an adequate procedure to determine crosstalk values in order to improve comparability of measurement results between testing laboratories and to enable a load cell performance rating in accordance to the crosstalk specification for transducers in vehicle crash testing given in ISO 6487, SAE-J211-1 and SAE J2570.

1 Scope 1.1 General The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions. 1.2 Applicability Testing in accordance with the test method in this Standard is applicable to modular and built-in-place vegetated roof systems. 1.3 Exceptions Testing in accordance with the test…

This document a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows, b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building, and c) gives rules for determining these quantities from the results of…

This document specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of pumped samplers used in conjunction with an air sampling pump and of procedures using these samplers for the determination of gases and vapours in workplace atmospheres. This document addresses requirements for method developers and/or manufacturers. NOTE 1 For the…

This document specifies a laboratory test method for determining the degree and rate of the aerobic biodegradation level of plastic materials. Biodegradation of plastic materials is determined by measuring the oxygen demand in a closed respirometer when exposed to seawater sampled from coastal areas under laboratory conditions. The conditions described in this document might not always correspond…

This document specifies a laboratory test method for determining the degree and rate of the aerobic biodegradation level of plastic materials. Biodegradation is determined by measuring the CO2 evolved from plastic materials when exposed to seawater sampled from coastal areas under laboratory conditions. The conditions described in this document might not always correspond to the optimum…

IEC 61010-2-202:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement,…