Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standa...
This document is applicable to cookstoves used primarily for cooking or water heating in domestic, small-scale enterprise, and institutional applications, typically with firepower less than 20 kW and cooking vessel volume less than 150 l, excluding cookstoves used primarily for space heating. For solar cookstoves, the provisions of this document are applicable only for evaluating cooking power,…
1 SCOPE
1.1 This method of test is applicable to firestop systems with or without penetrating items such as cables,
cable trays, conduits, ducts and pipes. These firestop systems are intended for use in openings in fire
resistive wall and floor assemblies and membranes forming part of an assembly required to have a fire
resistance rating and linear openings between adjacent fire resistive…
STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF FLOORING, FLOOR COVERINGS, AND MISCEL...
1 SCOPE
1.1 This Standard is applicable to the finished surface or covering of a floor extending to a maximum
depth of 65 mm. This method is also applicable to the following:
A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102, Standard
Method of Test for Surface Burning Characteristics of Building Materials and Assemblies,
without the use of supporting material…
STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES
1 SCOPE
1.1 This method of test for surface burning characteristics of building materials is applicable to any type
of building material that, by its own structural qualities or the manner in which it is applied, is capable of
supporting itself in position or may be supported in the test furnace as described in this Standard (see
Appendix A) or in a manner comparable to its recommended use.…
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031:...
IEC 61010-031:2015+A1:2018 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies are for direct electrical connection between a part and electrical test and measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. It has the status of a…
Protective clothing for firefighters — Physiological impact — Part 1: Measurement of coupled heat an...
This document provides a test method for evaluating the physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a series of simulated activities (phases) under defined ambient conditions. This standard test method characterizes the essential properties of fabric assemblies of a representative garment or clothing ensemble for thermo-physiological…
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031:...
IEC 61010-031:2015+A1:2018 specifies safety requirements for hand-held and hand-manipulated probe assemblies of the types described below, and their related accessories. These probe assemblies are for direct electrical connection between a part and electrical test and measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. It has the status of a…
Specification of technical grade sulphur hexafluoride (SF<sub>6</sub>) and complementary...
IEC 60376:2018 defines the quality for technical grade sulphur hexafluoride (SF<sub>6</sub>) and complementary gases such as nitrogen (N<sub>2</sub>) and carbon tetra-fluoride (CF<sub>4</sub>), for use in electrical equipment. Detection techniques, covering both laboratory and in-situ portable instrumentation, applicable to the analysis of SF<sub>6</…
