Firefighter Dress Uniform (Federal Public Service)
1.1
This standard applies to uniforms for Federal Public Service Firefighters.
1.2
The attention of users of this standard is drawn to Notes, par. 7.1 for
information on construction when uniforms are purchased privately.
This standard applies to a compound suitable for removing grease, oil and other
surface contamination from metal parts. This standard is primarily intended to
serve the requirements of government.
Textile Test Methods Bursting Strength - Ball Burst Test
Determines the bursting strength of knitted and other nonwoven
fabrics by the ball burst procedure. Although it may also be
used with woven fabrics, it should be noted that for such
materials it is the breaking strength of the less extensible set
of yarns that governs the value of bursting strength observed.
This method is recommended for very extensible fabrics and for
fabrics of bursting…
Signage System, Extruded Aluminum, Federal Identity Program
1.1
This specification applies to coated aluminum extrusions which are components
utilized as the substrate for signs. These signs are generally used in
exterior environments, but may be used for interiors.
1.2
The use of this specification is mandatory for all organizations subject to
the Federal Identity Program.
Letters and Symbols, Die-Cut Film, Federal Identity Program
1.1
This specification applies to die-cut film letters and symbols for use in
Federal Identity Program applications such as signs and vehicle marking.
1.2
The use of this specification is mandatory for all organizations subject to the
Federal Identity Program.
Welded Steel Construction (Metal Arc Welding) (Metric version)
1. Scope
1.1 This Standard covers welding requirements for any type of welded steel construction with the exception of those types listed in Clause
1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to dynamically loaded structures are included in Clauses 11 and…
Welded Steel Construction (Metal Arc Welding) (Imperial version)
1. Scope
1.1 This Standard covers welding requirements for any type of welded steel construction with the exception of those types listed in Clause
1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to dynamically loaded structures are included in Clauses 11 and…
1. Scope
1.1 Types
This Standard covers three types of asphalt-impregnated and -coated glass-roll roofing surfaced with insoluble inorganic mineral matter:
(a) Types I and II: asphalt-impregnated and -coated glass-fibre felt surfaced with water-insoluble inorganic mineral matter;
(b) Type III: asphalt-impregnated and -coated glass-fibre felt surfaced with fine mineral matter on the…
Textile Test Methods Bursting Strength - Diaphragm Pressure Test
Determines the bursting strength of knitted and other non-woven
fabrics by the diaphragm pressure procedure. Although it may
also be used with woven fabrics, it should be noted that for such
materials it is the breaking strength of the less extensible set
of yarns that governs the value of bursting strength observed.
The extensibility of the diaphragm limits the use of this
procedure to…
Operations Quality Assurance for Nuclear Power Plants
1. Scope
1.1
This Standard contains the requirements for the quality assurance program
applicable to the operational phase of a nuclear power plant.
1.2
This Standard embodies the relevant quality assurance requirements of CSa
Standard N286.0 and is the governing Standard for operations quality assurance
activities in the event of any conflicting requirements.
1.3
This Standard is…
