Rechercher

This document specifies the method of test for the mechanical resistance and strength of components of respiratory protective devices.

This document specifies a procedure for run-through train operations, identified as smart transportation. This concept provides direct, one-seat ride services in high quality corridors connecting cities and transportation hubs without forcing transfers. Improved operations planning, greater use of interchange or rental use arrangements are described so that these services can be implemented…

This document specifies a method to predict the dynamic forces generated by an active component on a receiving structure from measurement on a test bench. It sets out the requirements applicable to test benches and setup measurement conditions of dynamic forces: a criterion of validity of transfer functions measurements can be established for example. The objective is to evaluate noise and…

1 Scope 1.1 As noted in Low Voltage Transformers – Part 1: General Requirements, UL 5085-1, or CSA C22.2 No. 66.1, Low Voltage Transformers – Part 1: General Requirements, the requirements of Part 2 cover: a) Air-cooled transformers and reactors for general use; b) Autotransformers; c) Ferroresonant transformers; d) Cord-connected transformers; and e) Transformers incorporating overcurrent…

1 Scope 1.1 These requirements cover flexible metallic hose supplied with fittings on each end that facilitate connection without twisting the hose. They have a corrugated metal core or a nonmetallic inner core which are covered with a stainless steel braid. They have a nominal inside diameter of not more than 4 in (101 mm) intended for use in piping systems carrying compressed gases, such as…

This document specifies requirements concerning the approval and/or homologation of welding processes, contractors, welders, inspectors and acceptance of welded joints in the factory and/or track. This document is applicable to the following rail welding processes: flash butt welding (FBW); gas pressure welding (GPW); aluminothermic welding (ATW); enclosed arc welding (EAW). In this document,…

1 Scope This document provides principles and requirements for the safe handling and storage of wood pellets in residential and other small-scale applications. It covers the supply chain from loading of the delivery truck, requirements of delivery trucks, connections to the end-user's store and the delivery process. It also covers the design and construction of pellet storage systems.…

1 Scope 1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, connectors, junction boxes, and live-end covers rated up to 1200 A (for single- and multi-pole) and above 750 V to 35 kV ac, 50/60 Hz or up to 1500 V dc and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

This document specifies requirements for CAN-based communication systems between the in-vehicle network and the diagnostic link connector of the vehicle. This document does not specify any requirements related to the in-vehicle CAN network architecture. This document specifies the requirements to enable the in-vehicle CAN-based communication systems to establish, maintain, and terminate…

This document provides definitions of functional requirements for connectivity among nomadic devices, cloud servers and micro mobility during pre-trip, post-trip and while driving, which is defined in ISO/TR 22085-1, and datasets for providing seamless mobility service. In addition, it also delivers related standards required to develop and operate the service platform between a nomadic device…