Rechercher

Specifies the requirements for the connection of implements or attachments to the rear of lawn and garden ride-on tractors by means of a one-point hitch in association with a manual or power lift system. Standard dimensions for hitch point location, hitch tube and implement yoke are laid down to ensure the connection of specific implements or attachments. Applies to lawn and garden tractors as…

Relates to the tape packaging of electronic components without leads or with lead stumps which are intended to be connected to electronic circuits. Includes only those dimensions which are essential for the taping of components for the above-mentioned purposes.

Concerne la mise en bande des composants électroniques sans fils de sorties ou avec tronçons de sorties destinés à être connectés à des circuits électroniques Seules les dimensions essentielles pour la mise sur bande de composants destinés aux opérations mentionnées ci-dessus sont données.

Concerne les magasins chargeurs pour les boîtiers à double rangée de sorties (DIL) des composants électroniques destinés à être connectés à des circuits électroniques.

Specifies the requirements for the connection of implements or attachments to the rear of lawn and garden ride-on tractors by means of a three-point hitch in association with a power lift. Dimensions relating to the implement, the tractor and the mast height are given. Applies to lawn and garden tractors as defined in ISO 9191. Annex A is for information only and gives a bibliography.

Applies to electrical equipment and systems in the field of audio, video, television and audiovisual engineering, particularly where such equipment may be operated by persons who are not necessarily technically trained. Only equipment to be operated by means of a plug and socket connection on single-phase a.c. supplies not exceeding 250 V, or a d.c. supply not exceeding 50 V, is covered.

1. Scope 1.1 This Standard applies to cord-connected, electrically heated warming pads with associated control units, for household and hospital use, to be used in nonhazardous locations, designed for nominal 120 V ac or dc circuits, in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to general use electrically heated cushions incorporating one…

1. Scope 1.1 General This Standard establishes limits and methods of measurement of the immunity of radio and television broadcasting receivers and certain associated equipment to degradation of performance due to electromagnetic disturbances. 1.2 Applicability This Standard is applicable to immunity of two classes of equipment from degradation of performance resulting from…

1.1 This Standard covers structural quality steel plates, shapes, hollow sections, sheet piling, and bars for general construction and engineering purposes. 1.2 A number of strength levels are available under this Standard and are designated by the minimum yield strength in ksi. The grades, types, and strength levels normally available are shown in Table 1. Charpy V-Notch categories…

Gives dimensions and tolerances and the code for screw thread. Screws with shallow thread shall be as given in figures 1 and 2 and tables 1 and 2. Screws with deep thread shall be as given in figures 3 and 4 and tables 3 and 4. Marking and packaging shall be in accordance with ISO 6018. An example for combined screw is given in annex A. An interrelationship of International Standards dealing with…