Tracteurs et matériels agricoles — Coupleurs hydrauliques à usage général
La présente Norme internationale fixe les dimensions principales des parties en contact et les exigences de fonctionnement des coupleurs hydrauliques utilisés pour transmettre la puissance hydraulique des tracteurs agricoles aux machines agricoles. Elle est applicable aux coupleurs utilisés sur les canalisations hydrauliques, qui sont connectés et déconnectés fréquemment pour permettre le…
Information Technology - Telecommunications and Information Exchange
Between Systems - End System R...
This National Standard of Canada is equivalent to International Standard
ISO/IEC 10030:1990.
This International Standard defines a protocol for the exchange of routeing
information between an End System and a Subnetwork Address Resolution Entity.
This International Standard is applicable to:
a) End Systems which operate according to the main body of ISO 8878 to provide
and…
1.1
Provides procedures for measuring harmonic currents generated by equipment to
the extent that they affect the safety of electrical installations when the
equipment is installed in accordance with the Canadian Electrical Code, Part I.
1.2
The procedures described in this Standard are provided for referencing in the
Standards forming Part II of the Canadian Electrical Code. Although…
This National Standard of Canada is equivalent to American National Standards
Institute standard ANSI T1.408-1990.
1.1 General
It establishes performance and technical criteria for interfacing and
interconnecting the various functional groups shown in figure 1. Compliance
with this standard is intended to ensure compatibility at the interface points
/a and /b (figure 1) and should not…
1.1
This Standard covers structural quality steel plates, shapes, hollow sections,
sheet piling, and bars for general construction and engineering purposes.
1.2
A number of strength levels are available under this Standard and are
designated by the minimum yield strength in megapascals. The grades, types,
and strength levels normally available are shown in Table 1. Charpy V-Notch…
1. Scope
1.1
These requirements apply to drive machine controllers, logic controllers, and
operating devices accessory thereto, for starting, stopping, regulating,
controlling, or protecting electric motors, generators, or other equipment, for
elevators, escalators, moving walks, dumbwaiters, and elevating devices for the
handicapped (wheelchair and stairway lifts).
1.2
The electrical…
Integrated Services Digital Network (ISDN) Terminal Adaptation Using
Statistical Multiplexing
This National Standard of Canada is equivalent to American
National Standards Institute standard ANSI T1.612-1990.
1 Scope
This standard covers the connection between the Integrated Services Digital
Network (ISDN) and terminals with interfaces for modems conforming to current
standards (e.g. ANSI/EIA 232-D-1986), operating in accordance with demand or
semi-permanent circuit mode ISDN…
1.1
Applies to information processing equipment and associated electronic units and
to business equipment intended to be connected to supply circuits with a
maximum nominal voltage of 600 V and designed to be operated under conditions
of normal use in nonhazardous locations when installed in accordance with the
Canadian Electrical Code, Part I.
1.2
This Standard applies to equipment that…
Surface acoustic wave (SAW) resonators - Part 3: Standard outlines and lead connections
Loose-leaf booklet containing standard outlines and lead connections of surface acoustic wave (SAW) resonators. Six sheets are included and supplements will be issued as new outlines are developed.
