Rechercher

PARTS OF THIS SERIES HAVE BEEN WITHDRAWN - SEE NOTES ABOVE INDIVIDUAL PARTS. B45.0-02 General Requirements for Plumbing Fixtures 1. Scope 1.1 This Standard applies to the following plumbing fixtures: (a) bathtubs; (b) kitchen and bar sinks; (c) lavatories; (d) laundry tubs; (e) shower enclosures and receptors; (f) drinking fountains and water coolers; (g) water closets; (h)…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13818-2:2000 (second edition, 2000-12-15). 1 Scope This Recommendation | International Standard specifies the coded representation of picture information for digital storage media and digital video communication and specifies the decoding process. The representation supports constant bitrate transmission,…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14776-232:2001 (first edition, 2001-11). 1 Scope and object 1.1 Scope This part of ISO/IEC 14776 defines a protocol for the transport of commands and data over High Performance Serial Bus. The transport protocol, Serial Bus Protocol 2 or SBP- 2, requires implementations to conform to the requirements of this…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15205:2000 / IEEE Std 1496, 1993 (first edition, 2000-06). 1.1 Scope and object SBus is a high performance computer I/O interface for connecting integrated circuits and SBus Cards to a computer system motherboard. This standard defines the mechanical, electrical, environmental, and protocol requirements for the…

This National Standard of canada is equivalent to International Standard ISO/IEC 8877:1992 (second edition, 1992-11-15). 1 Scope This International Standard specifies the 8-pole connector (plug and jack) and the assignments of poles/contacts for use in physical interfaces of Integrated Services Digital Network (ISDN) basic access arrangements. These physical interfaces may be located at…

This National Standard of Canada is equivaent to International Standard ISO/IEC 14165-131:2000 (first edition, 2000-05). 1 Scope This ISO/IEC standard for FC-SW specifies tools and algorithms for interconnection and initialization of Fibre Channel switches to create a multi-switch Fibre Channel Fabric. This Standard defines an E_Port (.Expansion Port.) that operates in a manner similar to…

This National Standard of Canada is equivalent to International Standard ISO/IEC 11518-10:2001 (first edition, 2001-03). 1 Scope This part of ISO/IEC 11518 specifies a physical-level, point-to-point, full-duplex, link interface for reliable, flow-controlled transmission of user data at 6 400 Mbit/s per direction, across distances of up to 1 km. A parallel copper cable interface for…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8208:2000 (fourth edition, 2000-11-01). 1 Scope This International Standard specifies the procedures, formats and facilities at the Packet Layer for Data Terminal Equipment (DTE) operating in conformance with ITU-T Recommendation X.25. Both Virtual Call and Permanent Virtual Circuit modes of operation are…

This National Standard of Canada is equivalent to International Standard ISO/IEC 2593:2000 (fourth edition, 2000-12-15). 1 Scope This International Standard specifies the 34-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) where ITU-T Recommendation V.36 or Recommendation X.21bis together…

This part of ISO/IEC 9318 describes the logical level (generic level) interface for tape drives and it provides a definition of the device-generic portion of a family of standards called the Intelligent Peripheral Interface (IPI). The purpose of this standard is to facilitate the development and utilization of an intelligent interface which permits the interconnection of multiple peripheral types…