Rechercher

L'ISO 21969:2005 s'applique aux raccords flexibles haute pression destinés à être connectés à des bouteilles ou à des cadres de bouteilles dont la pression nominale de remplissage est inférieure ou égale à 25 000 kPa à 15 °C, pour utilisation avec les gaz médicaux suivants: l'oxygène; le protoxyde d'azote; l'air respirable; l'hélium;le dioxyde de carbone;le xénon;…

ISO 21969:2005 applies to high-pressure flexible connections intended to be connected to cylinders or cylinder bundles with nominal filling pressures up to 25 000 kPa at 15 °C for use with the following medical gases: oxygen; nitrous oxide; air for breathing;helium; carbon dioxide; xenon; mixtures of these gases; air for driving surgical tools; nitrogen for driving surgical tools. ISO 21969:2005…

ISO 2974:2005 specifies the dimensional requirements of high-pressure pipe end-connections for diesel (compression-ignition) engine fuel injection equipment. It is applicable to externally threaded end-connections of types 1 and 2 having a 60° female cone, as well as to the pipe end assemblies of high-pressure fuel injection pipes with outside diameters of up to and including 12 mm.

Scope 1.1.1 This standard applies to newly produced household cooking gas appliances (see Part IV, Definitions), hereinafter referred to as units or appliances, constructed entirely of new, unused parts and materials. These appliances may be floor supported or built-in. 1.1.2 This standard applies to household cooking gas appliances: a. For use with natural gas; b. For use with manufactured…

Applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity…

provides general guidance on the steady-state performance requirements of HVDC systems. It concerns the steady-state performance of two-terminal HVDC systems utilizing 12-pulse converter units comprised of three-phase bridge (double- way) connections (see Figure 1), but it does not cover multi-terminal HVDC transmission systems. Both terminals are assumed to use thyristor valves as the main…

ISO 5673-1:2005 specifies the power take-off (PTO) drive shafts of a tractor or self-propelled machine used in agriculture and the power-input connection (PIC) of its implement, establishing a method for determining PTO static and dynamic torsional strength while giving manufacturing and safety requirements. It is applicable only to those PTO drive shafts and guards mechanically linked to the…

ISO 5673-2:2005 gives the forms and applications of (PTO) drive shafts for tractors and self-propelled machines used in agriculture, and specifies the dimensions for, and clearance zone around, the implement power-input connection (PIC) for a variety of attachments. Its intent is to ensure proper clearance between the PTO drive line and adjacent components on the implement and tractor when both…

IEC 61995-1:2005 applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires to final circuits rated at not more than 16 A without providing mechanical support for the luminaire. DCLs are intended for use according to their IP rating per IEC 60529.