Rechercher

ISO 16528-1:2007 defines the performance requirements for the construction of boilers and pressure vessels. It is not the intent of ISO 16528-1:2007 to address operation, maintenance and in-service inspection of boilers and pressure vessels. In relation to the geometry of the pressure-containing parts for pressure vessels, ISO 16528-1:2007 includes welding end connection for the first…

1 Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include two or fewer pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC), C22.1,…

Fibre Channel is a high speed serial interface using either optical or electrical connections (i.e., the physical layer) at data rates currently up to 2 Gbits/s with a growth path to 10 Gbits/s, and provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command sets, the High-Performance…

IEC 61800-5-1:2007 It specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are traction…

L'IEC 61800-5-1:2007 spécifie les exigences pour les entraînements électriques de puissance à vitesse variable, ou leurs éléments, en ce qui concerne les considérations de sécurité électrique, thermique et énergétique. Elle ne couvre pas l'équipement entraîné, à l'exception des exigences pour les interfaces. Elle s'applique aux systèmes d'entraînement électrique à vitesse…

ISO 12151-4:2007 specifies the general and dimensional requirements for the design and performance of ISO 6149 metric stud end hose fittings made of carbon steel, for nominal hose inside diameters of 6,3 mm through 38 mm inclusive, in accordance with ISO 4397. These hose fittings are for use in hydraulic fluid power systems with hose that meets the requirements of the respective hose standards…

ISO 12151-5:2007 specifies the general and dimensional requirements for the design and performance of 37° flared hose fittings in accordance with ISO 8434-2, made of carbon steel, for nominal hose sizes of 6,3 mm through 51 mm inclusive in accordance with ISO 4397. These hose fittings are for use in hydraulic fluid power systems with hose that meets the requirements of the respective hose…

B64.0-07 1 Scope 1.1 The CSA B64 Series of Standards covers vacuum breakers and backflow preventers that are used in potable water supply systems to prevent cross-connections. 1.2 This Standard specifies definitions, general requirements, test methods, markings, and instructions that are common to some or all of the CSA B64 Series. 1.3 This Standard is not a complete Standard in…

1. SCOPE 1.1 This standard applies to two types of light petroleum distillates. 1.2 The light petroleum distillates covered by this standard are intended for use in applications as described below. 1.2.1 Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CAN/CSA-B140.9.3, when used in well-ventilated surroundings, and in wick-fed illuminating lamps. 1.2.2 Type…

1. SCOPE 1.1 This standard defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I. (See Figure 1 for a schematic representation.) 1.1.1 This standard does not include vapour…