Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: ...
ISO 10077-2:2011 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.
The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds…
Solderless connections - Part 5: Press-in connections - General requirements, test methods and pract...
IEC 60352-5:2012 is applicable to solderless press-in connections for use in telecommunication equipment and in electronic devices employing similar techniques. The press-in connection consists of a termination having a suitable press-in zone which is inserted into a plated-through hole of a double-sided or multilayer printed board. Information on materials and data from industrial experience is…
Lightning protection system components (LPSC) - Part 1: Requirements for connection components
IEC 62561-1:2012 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, bonding and bridging components, expansion pieces and test joints. Testing of components for an explosive atmosphere is not covered by this standard.
Lightning protection system components (LPSC) - Part 1: Requirements for connection components
IEC 62561-1:2012 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, bonding and bridging components, expansion pieces and test joints. Testing of components for an explosive atmosphere is not covered by this standard.
1 Scope
1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors,
panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and
up to 600 volts ac or dc and not intended for connection or disconnection under load conditions.
1.2 These devices are intended to provide power from feeders or branch circuits, or…
STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS
1.1 This Standard specifies the requirements for stay in place, modular expanded polystyrene (EPS)
Insulating Concrete Form (ICF) units. Once filled with concrete, the ICF units remain in place as the
thermal insulation for the resulting cast-in-place concrete wall of uniform cross-section and thickness.
1.2 The requirements of this Standard apply to ICFs that act as permanent formwork for cast-…
Audio/video, information and communication technology equipment — Part 1: Safety requirements
1 Scope
This part of IEC 62368 is applicable to the safety of electrical and electronic equipment within the field of
audio, video, information and communication technology, and business and office machines with a rated
voltage not exceeding 600 V. This standard does not include requirements for performance or functional
characteristics of equipment.
NOTE 1 Examples of equipment within…
Competency Standard for diving, hyperbaric chamber, and remotely operated vehicle operations
1 Scope
1.1
This Standard applies to occupational diving, hyperbaric facility, and remotely operated vehicle (ROV)
operations conducted in connection with all types of work and employment and describes the
requirements for minimum competency levels for all personnel directly associated with the identified
techniques of diving or ROV operations.
Canadian safety and health legislation…
Medical electrical equipment — Part 2-8: Particular requirements for the basic safety and essential ...
This international standard applies to the basic safety and essential performance of
therapeutic X-RAY EQUIPMENT with NOMINAL X-RAY TUBE VOLTAGES in the range 10 kV to 1 MV
when connected to alternating current SUPPLY MAINS, hereafter referred to as ME EQUIPMENT.
NOTE This standard covers TELETHERAPY and BRACHYTHERAPY.
If a clause or subclause is specifically intended to be applicable to ME…
