Rechercher

This pack contains IEC 60335-2-6:2024 EXV and IEC 60355-2-6:2024 CMV. IEC 60335-2-6:2024 deals with the safety of stationary electric cooking appliances, such as cooking ranges, hobs, and ovens, for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances including direct current (DC)…

IEC 60335-2-6:2024 deals with the safety of stationary electric cooking appliances, such as cooking ranges, hobs, and ovens, for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances. This standard also…

Scope 1.1 These requirements cover suspended ceiling grid low voltage/extra-low voltage systems and equipment intended for installation and use in accordance with the: a) In Canada: 1) Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, CSA C22.1; b) In the United States: 1) National Electrical Code (NEC), NFPA 70. 1.2 The suspended ceiling grid low voltage/…

Domaine d’application 1.1 Ces exigences s’appliquent aux systèmes d’alimentation électrique des plafonds suspendus à basse tension ou à très basse tension ainsi qu’aux équipements destinés à être installés et utilisés conformément aux critères suivants : a) Au Canada : 1) Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, CSA C22.1; b) Aux États-Unis : 1)…

This document specifies requirements for the connection ends of push-on connections used with fuel injection equipment. Three types of push-on connections (types A, B and C) are described in this document.

This document specifies generic measuring and calculation methods to evaluate the energy efficiency of multiple components connected in a functional system installed on board ships, vessels for inland navigation and offshore structures. A maritime functional system consists of multiple components integrating multiple functions, working together to achieve an overall goal. The purpose of this…

IEC 60512-28-100:2024 specifies the test methods for signal integrity and transmission performance for connectors specified in respective parts of IEC 60603-7, IEC61076-1, IEC 61076-2, IEC 61076-3 and IEC 63171 series of standards for connecting hardware applications from 0,1 MHz up to 2 000 MHz, with reference to this document. Note: This document is also suitable for testing signal integrity…

L'IEC 60512-28-100:2024 spécifie les méthodes d’essai pour l’intégrité du signal et les performances de transmission pour les connecteurs spécifiés dans les parties respectives de l'IEC 60603-7, l'IEC 61076-1, l'IEC 61076-2, l'IEC 61076-3 et de la série de normes IEC 63171 pour connecter les applications matérielles de 0,1 MHz à 2 000 MHz, en référence au présent document…

1 Scope 1.1 These requirements cover Original Equipment Manufacturer (OEM) and non-OEM crimp tools that have been evaluated for use with the following types of specified connecting devices: a) Grounding and bonding equipment; b) Electrical quick-connect terminals; c) Wire connectors; d) Wire-connector adapters; e) Ferrules; and f) Lightning protection components. These crimp tools are…

Scope Replacement: NOTE 1 There is guidance or rationale for this subclause contained in Clause AA.2. This document applies to the basic safety and essential performance of an EMS ventilator in combination with its accessories, hereafter also referred to as ME equipment: ? intended for patients who need differing levels of support from artificial ventilation including ventilator-dependent…