Rechercher

1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, and connectors and associated integrated accessories (i.e., junction box), rated up to 1,200 amperes (for single- and multi-pole) and above 750 V to 35 kV volts ac, 50/60 Hz and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

IEC 62446-1:2016 defines the information and documentation required to be handed over to a customer following the installation of a grid connected PV system. It also describes the commissioning tests, inspection criteria and documentation expected to verify the safe installation and correct operation of the system. It is for use by system designers and installers of grid connected solar PV…

L'IEC 62446-1:2016 définit les informations et la documentation exigées devant être remises à un client à la suite de l'installation d'un système PV connecté au réseau. Elle décrit également les exigences des essais de mise en service, des critères d'examen et de la documentation prévus pour vérifier la sécurité d'installation et le fonctionnement correct du système. Elle…

IEC 60384-14-1:2016 is a blank detail specification. It is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be taken into account. This edition includes the following significant technical changes with…

ISO 17575-2:2016 defines how to convey all or parts of the data element structure defined in other parts of ISO 17575 over any communication stack and media suitable for this application. It is applicable only to mobile communication links (although wired links, i.e. back office connections, can use the same methodology). To establish a link to a sequence of service calls initializing the…

ISO 18397:2016 specifies requirements and test methods for air-powered and electrical-powered scaler handpieces and scaler tips, including piezo, ferrostrictive and magnetostrictive type ultrasonic scalers, operated as stand-alone items or connected to dental units, for use on patients. It also contains specifications on manufacturers' instructions, marking and packaging.

IEC PAS 63023:2016 establishes a unique input interface for connection of an external alarming device to haemodialysis equipment. The input interface of the haemodialysis equipment is designed as a simple solution, which takes a single fault condition of the input interface into account, to stop the extracorporeal blood flow in case of needles slipping out from the fistula or graft detected by…

ISO 9667:2016 specifies dimensional and physical requirements of tow bar connections to tractor and aircraft (see Figure 1). It is applicable to any new type of commercial-transport-category aircraft tow bar designed or built after publication of this International Standard.

IEC 60118-13:2016 covers relevant EMC phenomena for hearing aids. Hearing aid immunity to high frequency fields originating from digital wireless devices such as mobile phones was originally identified as the most relevant EMC phenomena impacting hearing aids. Since the inclusion of RF generating components within hearing aids, such as digital signal processors or wireless transceivers,…

This Standard applies to occupational diving operations conducted in connection with unexploded explosive ordnance (UXO) and specifies minimum competency level requirements for all personnel directly associated with the techniques of UXO diving identified in this Standard and additional requirements for occupational safety during UXO diving operations. This Standard also applies to police…