Rechercher

L'IEC 60335-2-58:2002+A1:2008+A2:2015 Deals with the safety of electrically operated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles, with or without means of heating water or drying, not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other…

IEC TR 60865-2:2015(E) shows the application of procedures for the calculation of mechanical and thermal effects due to short circuits as presented in IEC 60865-1. Thus, this technical report is an addition to IEC 60865-1. It does not, however, change the basis for standardized procedures given in that publication. This second edition cancels and replaces the first edition published in 1994 and…

ISO 13185-2:2015 specifies the requirements of an ASN.1-based protocol between a vehicle-ITS-Station Gateway (V-ITS-SG) and a nomadic and/or mobile device (ND) to easily exchange vehicle information data. The ASN.1-based protocol has been specified to support a wired or wireless connection between the ND and V-ITS-SG. The Unified Gateway Protocol (UGP) is used between the V-ITS-SG and the ND. UGP…

IEC 61837-3:2015 deals with standard outlines and terminal lead connections as they apply to SMDs for frequency control and selection in metal enclosures and is based on IEC 61240 which standardized layout rules of outline drawings of the surface-mounted devices. This edition includes the following significant technical changes with respect to the previous edition: - The outline drawing is…

IEC 60384-19:2015 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-…

IEC TS 62578:2015 describes the operation conditions and typical characteristics of active infeed converters (AIC) of all technologies and topologies which can be connected between the electrical power supply network (lines) a.c. side and a constant current or voltage type d.c. side and which can convert electrical power (active and reactive) in both directions (generative or regenerative). The…

L'IEC TS 62578:2015 décrit les conditions de fonctionnement et les caractéristiques typiques des convertisseurs à alimentation active (AIC), quelles que soient leurs technologies et topologies, qui peuvent être connectés entre le réseau (les phases) d'alimentation électrique côté alternatif et un type de courant ou de tension constant(e) côté continu, et qui peuvent convertir la…

ISO/IEC 17821:2015 defines the network specification for devices, which are operated on IEEE Std. 802.15.4-2011 PHY, capable to support the channel-hopped TDMA links of the DSME MAC of IEEE Std. 802.15.4e-2012, to provide low-cost communication network that allows reliable, deterministic-latency, and scalable wireless mesh connectivity. This International Standard provides the following: -…

ISO/IEC 17821:2015 defines the network specification for devices, which are operated on IEEE Std. 802.15.4-2011 PHY, capable to support the channel-hopped TDMA links of the DSME MAC of IEEE Std. 802.15.4e-2012, to provide low-cost communication network that allows reliable, deterministic-latency, and scalable wireless mesh connectivity. This International Standard provides the following: -…

ISO 27145-6:2015 defines the requirements for the external test equipment as listed: - a means of establishing communications between a WWH-OBD-equipped vehicle and external test equipment; - a set of diagnostic services, including addressing methods, to be provided by the external test equipment in order to exercise the services defined in ISO 27145‑3. ISO 27145-6:2015 describes the…