ISO 2974:2018 specifies the dimensional requirements of end-connections for high-pressure fuel injection equipment components, used on diesel (compression-ignition) engines.
ISO 2974:2018 is applicable to externally threaded 60° female cones (see Figures 1, 2, 5, and 6) and intended for use with high-pressure fuel injection pipe assemblies with tube outside diameters of:
- up to and…
Information technology — Telecommunications and information exchange between systems — Local and met...
ISO/IEC/IEEE 8802-15-4:2018 defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements. In addition, the standard provides modes that allow for precision ranging. PHYs are defined for devices operating various license-free…
Information technology - Telecommunications and information exchange between systems - Local and met...
ISO/IEC/IEEE 8802-15-4:2018 defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements. In addition, the standard provides modes that allow for precision ranging. PHYs are defined for devices operating various license-free…
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential...
IEC 80601-2-49:2018 applies to basic safety and essential performance requirements of multifunction patient monitors, hereafter referred to as ME equipment or medical electrical systems. This particular standard applies to multifunction patient monitors intended for use in professional healthcare facilities as well as in the emergency medical service environment or the home healthcare environment…
Electrical energy storage (EES) systems - Part 1: Vocabulary
IEC 62933-1:2018 defines terms applicable to electrical energy storage (EES) systems including terms necessary for the definition of unit parameters, test methods, planning, installation, safety and environmental issues.
This terminology document is applicable to grid-connected systems able to extract electrical energy from an electric power system, store it internally, and inject electrical…
Systèmes de stockage de l'énergie électrique (EES) - Partie 1: Vocabulaire
L’IEC 62933-1:2018 définit les termes applicables aux systèmes de stockage de l’énergie électrique (EES), y compris les termes nécessaires à la définition des paramètres unitaires, des méthodes d’essai, de la planification, de l’installation, de la sécurité et des questions environnementales.
Ce document de terminologie est applicable aux systèmes connectés au réseau capables d’extraire l’…
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch ...
ISO 6162-2:2018 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa (420 bar[1]). It also specifies the dimensions of the seals to be used, as well as the…
Electromagnetic compatibility (EMC) — Part 6-5: Generic standards — Immunity for
equipment used in p...
This part of IEC 61000 specifies EMC immunity requirements which apply to electrical and
electronic equipment intended for use in power stations and substations, as described below.
Immunity requirements for electromagnetic phenomena with spectral contributions in the
frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies
or for phenomena where no requirements…
Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators
ISO 10524-2:2018 specifies design, construction, type testing, and marking requirements for manifold pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended for use in medical gas pipeline systems.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
ISO 10524-2:2018 applies to manifold pressure regulators and line pressure…
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators...
ISO 10524-1:2018 specifies the design, construction, type testing, and marking requirements for pressure regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide…
