STANDARD FOR SAFETY: Software Cybersecurity for Network- Connectable Products, Part 2-3: Particular ...
1 Scope
1.1 This security evaluation standard applies to the evaluation of security and life safety signaling system
components. It applies to, but is not limited to, the following products:
a) Alarm Control Units;
b) Network-Based Intrusion Detection System;
c) General Purpose Signaling Units;
d) Digital Video Equipment and Systems;
e) Mass Notification and Emergency Communication /…
NORME DE SÉCURITÉ: Cybersécurité des logiciels pour les produits à connexion réseau, partie 2-3 : ex...
1 Domaine d’application
1.1 La présente norme d’évaluation de la sécurité s’applique à l’évaluation des composants de systèmes
de signalisation de sûreté et de sécurité des personnes. Elle s’applique notamment aux produits suivants :
a) Postes de contrôle d’alarme;
b) Système de détection d’intrusion réseau;
c) Unités de signalisation à usage général;
d) Équipements et systèmes vidéo…
Ships and marine technology — Design requirements for international ballast water transfer connectio...
This document specifies the material requirements and dimensions of an international flange for the transfer of ballast water between a ship and a shore reception facility, or between ships.
It does not address any reconfiguration of the ship's ballast water piping system necessary to connect to the shore-side, e.g. construction of piping from the ship lower machinery levels to the main deck…
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, ...
IEC 61000-4-11:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 61000-4-11:2020 defines the immunity test methods and range of preferred test levels for electrical and…
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, ...
IEC 61000-4-11:2020 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This document applies to electrical and electronic equipment having a rated input current not exceeding 16 A per phase, for connection to 50 Hz or 60 Hz AC…
Compatibilité électromagnétique (CEM) - Partie 4-11: Techniques d'essai et de mesure - Essais d...
L'IEC 61000-4-11:2020 définit les méthodes d'essai d'immunité ainsi que la plage des niveaux d'essais préférentiels pour les matériels électriques et électroniques connectés à des réseaux d'alimentation à basse tension pour les creux de tension, les coupures brèves et les variations de tension. Le présent document s’applique aux matériels électriques et électroniques dont…
Appareils électromédicaux — Partie 2-31: Exigences particulières pour la sécurité de base et les per...
L'IEC 60601-2-31:2020 s’applique à la SECURITE DE BASE et aux PERFORMANCES ESSENTIELLES des STIMULATEURS EXTERNES alimentés par une SOURCE D’ENERGIE ELECTRIQUE INTERNE désignés ci-après sous le terme APPAREILS EM. Le présent document s'applique aux CABLES PATIENT tels qu’ils sont définis en 201.3.209, mais ne s’applique pas aux DERIVATIONS telles qu…
Medical electrical equipment — Part 2-31: Particular requirements for the basic safety and essential...
IEC 60601-2-31:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of EXTERNAL PACEMAKERS powered by an INTERNAL ELECTRICAL POWER SOURCE, hereafter referred to as ME EQUIPMENT. This document applies to PATIENT CABLES as defined in 201.3.209, but does not apply to LEADS as defined in 201.3.206. HAZARDS inherent in the intended physiological function of ME EQUIPMENT within the scope of this…
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Mu...
IEC 61162-460:2018+A1:2020 is an add-on to IEC 61162-450 where higher safety and security standards are needed, for example due to higher exposure to external threats or to improve network integrity. This document provides requirements and test methods for equipment to be used in an IEC 61162-460 compliant network as well as requirements for the network itself and requirements for interconnection…
IEC 60238:2016+A1:2017+A1:2020 applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in AC circuits only, where the working voltage does not exceed 250 V r.m.s. This ninth edition cancels and replaces the eighth edition published in 2004, Amendment 1: 2008 and Amendment 2…
