Oxygenated automotive gasoline containing ethanol (E1-E10 and E11-E15)
This National Standard of Canada applies to two types of oxygenated gasoline, E1-E10 (“Type A”) and E11-E15
(“Type B”), to which no lead or phosphorus compounds have been added, and in which the oxygenate consists
essentially of ethanol. They are intended for use in spark-ignition engines under a wide range of climatic conditions.
Each type may be supplied in one of four grades which differ in…
1 Scope
1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors,
panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up
to 600 volts ac or dc and not intended for connection or disconnection under load conditions.
1.2 These devices are intended to provide power from feeders or branch circuits, or are…
Piezoelectric sensors - Part 1: Generic specifications
IEC 63041-1:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 63041-1:2021 applies to piezoelectric sensors of resonator, delay-line and non-acoustic types, which are used in…
Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder
This document specifies a method for the evaluation of the buckling load which:
a) takes into account a geometric model of the hydraulic cylinder, meaning it does not treat the hydraulic cylinder as an equivalent column,
b) can be used for all types of cylinder mounting and rod end connection specified in Table 2,
c) includes a factor of safety, k, to be set by the person performing the…
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical test...
IEC 60700-1:2015+A1:2021 applies to thyristor valves with metal oxide surge arresters directly connected between the valve terminals, for use in a line commutated converter for high voltage d.c. power transmission or as part of a back-to-back link. It is restricted to electrical type and production tests. The tests specified in this standard are based on air insulated valves. For other types of…
Fibre optic interconnecting devices and passive components - Performance standard - Part 111-09: Sea...
IEC 61753-111-09:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category S – Subterannean, as defined in Table A.15 of IEC 61753‑1:2018. This first edition cancels and replaces IEC 61753-111-9 published in 2009. This edition constitutes a technical revision.…
Fibre optic interconnecting devices and passive components - Performance standard - Part 111-07: Sea...
IEC 61753-111-07:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category A – Aerial, as defined in Table A.13 of IEC 61753‑1:2018. Free breathing closures are not covered in this document. This first edition cancels and replaces IEC 61753-111-7 published in…
Lamp controlgear — Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlge...
1 Scope
This Standard specifies particular safety requirements for electronic controlgear for use on d.c. supplies
up to 380 V and a.c. supplies up to 600 V at 50 Hz or 60 Hz and at an output frequency that can deviate
from the supply frequency, associated with LED modules.
Notes:
1) A lamp controlgear for LED modules may also be referred to as “LED controlgear”, “LED driver”, “LED power…
CSA C22.2 No. 62031:21 LED modules for general lighting — Safety specifications -- CSA C22.2 nº 6203...
1 Scope
1.1
This Standard specifies general and safety requirements for
a) non-integrated light-emitting diode (LED) modules (LEDni modules) and semi-integrated LED
modules (LEDsi modules) for operation under constant voltage, constant current, or constant
power; and
b) integrated LED modules (LEDi modules) for use on dc supplies up to 250 V or ac supplies up to
600 V.
LED modules within…