General Purpose Electric Overhead Travelling Cranes
1. SCOPE
1.1 Scope. This Standard applies to all types of top-running electric overhead
travelling cranes for general use, with the exception of single girder cranes.
The Standard is not intended to apply to steel mill type cranes, which are
covered by other specifications, such as those of the Association of Iron and
Steel Engineers (AISE) and the British Iron and Steel Research…
1. Scope
1.1 This Standard covers asphalt roofing in shingle form, composed of roofing felt saturated and coated on both sides with asphalt, and surfaced on the weathered side with granulated slate or equivalent mineral material of solid or mixed colours.
1.2 This Standard covers the types of shingles listed in Clause 2.1 intended to be used with Appendix A.
Index of electrical measuring apparatus used in connection with ionizing radiation
Applies to mobile radio receivers having audio-frequency bandwidths generally not exceeding 10 kHz for the reception of voice and other types of signals using:
a)angle (Type G or F: phase/frequency) modulation, or
b)double-sideband amplitude (Type A) modulation with full carrier, or
c)single-sideband amplitude (Type H, J or R) modulation with full, reduced or suppressed carrier.
Standardizes the…
1. Scope
1.1 This Standard applies to electrically operated clothes-washing* and
dishwashing* machines including such washing machines in combination with other
devices (such as combination washing and drying machines*) for potentials of
600 volts or less, intended to be used in accordance with the rules of the
Canadian Electrical Code, Part I.
*For convenience only, the short terms "…
1. Scope
1.1 This Standard is concerned with the geometric irregularities of surfaces of solid materials. It establishes defi nite classifications for roughness, waviness, lay, and a set of symbols for drawings, specifications, and reports, and makes reference to requirements for Tracer Type Instruments, and specificati ons for Precision Reference Standards and Texture Comparison Specimens.…
1. SCOPE
1.1 This Specification applies to complete flue-connected oil burning stoves
incorporating oil burners of the vapourizing-type.
1.2 The requirements given herein apply to circulating and radiant room
heaters, ranges, and combination ranges, as defined in this Specification.
Note: The following related appliances are covered by other CSA Standards:
(a) Mobile hone…
Connectors for frequencies below 3 MHz (Mc/s) - Part 1: General requirements and measuring methods
Deals with terminology, classification into groups, values of rated voltage and of rated current, type designation, type tests, standard conditions for testing, visual inspection, clearances and creepage distances, electrical tests, mechanical tests and climatic tests. This part has been replaced by IEC 512-7.
Rotary wafer switches (low current rating). Part 1: General requirements and measuring methods
Deals with terminology, classification into groups, electrical ratings, marking, IEC type designation, type tests, standard conditions for testing, visual inspection, dimensions, clearances and creepage distances, electrical tests, mechanical tests, climatic tests and endurance tests.
Toggler switches - Part 1: General requirements and measuring methods
Applies to lever switches for use in electronic and electromechanical equipment, including switches necessary to connect the supply mains. Switches covered by this standard have a maximum rated voltage not exceeding 500 V and a maximum rated current not exceeding 25 A (d.c. or a.c. r.m.s. values).
Establishes uniform specifications and type test requirements for lever switches also establish…
