Rechercher

This International Standard specifies the dimensions and location of the cartridge aperture, pressure pad, and characteristics necessary for the appropriate flatness of the cartridge and location of film in the camera aperture, for any model of 8 mm Type S Model I motion-picture film camera cartridge [sound or silent, 15 m (50 ft) or 60 m (200 ft)].

1. Scope 1.1 This Standard applies to heater elements for use in equipment intended to be connected to a supply of nominal system voltage of 600 V or less, and to those elements that are installed in accordance with the Rules of the Canadian Ele ctrical Code, Part I. 1.2 This Standard applies to the following types: (a) open wire (including wire, ribbon, and expanded metal); (b)…

The method is applicable to contents of nickel as an alloying element in all types of copper alloys listed in International Standards. ISO 4743 specifies principle, reagents, apparatus, procedure, expression of results and test report.

1. Scope 1.1 This Standard applies to cord-connected and permanently connected fans and ventilators intended to be connected to supply circuits of 600 V and less, for use in accordance with the Rules of the Canadian Electrical Code, Part 1. 1.2 This Standard applies to fans and ventilators for ventilating or exaust purposes and filter units consisting of an air circulating fan and a…

This Series of standards applies to common types of plumbing fixtures such as bathtubs, sinks, W.C.'s, etc., but does not apply to appliances such as clothes washers or W.C.'s used in recreational vehicles. The standards include dimensional requirements, performance requirements and tests, and marking requirements and apply to plumbing fixtures made of vitreous china, enamelled…

1. Scope This Standard covers requirements for the physical properties and dimensions of sheet vinyl of both the unfilled (clear) vinyl wearing surface (Type I), and the filled wear layer (Type II) on an organic, inorganic, filled, foamed, or unfoamed vinyl composition or non-asbestos formulated backing.

Specifies the minimum qualifications, in terms of performance objectives, of personnel responsible for the installation, servicing and inspection of solid fuel burning systems of the type covered by CSA Standard B365-M1982. This standard also specifies the minimum qualifications, in terms of performance objectives, of personnel responsible for chimney sweeping and venting maintenance.

This International Standard specifies, for 8 mm Type S cameras and projectors, the dimensions of the image area produced by the camera on the film and the maximum projectable image area as well as the image positions relative to the reference edge-of the film, and the perforations used to position the images.

Specifies test methods necessary to check characteristics of hoses as defined in the specific product standards for each hose type. It also specifies complementary tests, the results of which can be essential to purpose users.