Rechercher

1.1 This Standard applies to motor operated food processing appliances* intended for use on nominal system voltages of 600 V and less, except that where appliances are driven by universal type motors or electromagnetic mechanisms, the Scope is limited to appliances rated for use on nominal system voltages of 240 V or less. This Standard applies to appliances designed to be used in accordance…

Describes the standard method of measurement of lamp cap temperature rise which is to be used when testing tungsten filament or discharge lamps for compliance with the limits. Covers the method of test and the specifications for test lampholders for lamps fitted with various sizes of ES and BC caps. This method has been used widely for incandescent lamps but its application is not limited to that…

Serves as a generic specification providing the basis for the sectional standards which apply to individual connector types. Establishes uniform concepts and procedures concerning : -terminology; -standard ratings and characteristics; -testing and measuring procedures concerning electrical electrical and mechanical properties; -classification of connectors with regard to environmental testing…

1. SCOPE 1.1 This Standard sets forth requirements for ionization-type and photoelectric-type detectors, rated at 300 V or less, to be employed in ordinary indoor locations in accordance with the following: A Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524M; B Standards of the National Fire Protection Association: No. 71,…

1. SCOPE 1.1 This Standard sets forth requirements for smoke-alarms, single- and multiple-station type, rated 120 V or less, intended for open area protection in ordinary indoor locations. 1.2 A smoke-alarm, as defined by these requirements, is a self-contained unit which consists of an assembly of electrical components including a smoke chamber, alarm-sounding appliance, and…

1. Scope 1.1 This Standard covers burned clay brick intended for use in masonry or in structural facing components of structures, or both. 1.2 The brick are prismatic units available in a variety of sizes, textures, colours, and shapes. This Standard is not intended to provide requirements for paving brick specified in ASTM Standard C902. 1.3 Brick are manufactured from clay,…

1. Scope 1.1 This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works, and that are used during construction, alteration, or demolition to raise and lower persons and/or materials connected with or related to a building project. 1.2 This Standard covers the design, construction, installation, operation, and acceptance…

1. Scope 1.1 This Standard applies to fuseholder assemblies, rejectors for Type C fuses, adapters for Type S fuses, and the current-carrying parts pertaining thereto and mounted on bases of suitable insulating material, designed to be employed in accordance with the Canadian Electrical Code, Part I. 1.2 Fuseholder assemblies covered by this Standard are intended to accept only the following…

1. Scope 1.1 This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works and that are used during construction, alteration, or demolition to raise and lower materials connected with or related to a building project. 1.2 This Standard covers the design, construction, installation, operation, and acceptance inspection and testing…

Applies to new voltage transformers for use with electrical measuring instruments and electrical protective devices at frequencies from 15 Hz to 100 Hz. The general requirements apply to all voltage transformers, but, for certain types, e.g. capacitor voltage transformers, the requirements are subject to the modifications stated in the appropriate chapter. Although the requirements relate…