Rechercher

Deals with the use of the X.25 Packed Level Protocol (PLP) as defined in ISO 8280 operating over ISO 8802 Local Area Networks (LANs). The operation of the X.25/PLP using the Logical Link Control (LLC) Type 2 procedures is described in section 2. The operation of the X.25/PLP using the LLC Type 1 procedures is specified in section 3. To be used in compliance with the standards ISO 7498:1984; ISO…

Deals with the use of the X.25 Packed Level Protocol (PLP) as defined in ISO 8280 operating over ISO 8802 Local Area Networks (LANs). The operation of the X.25/PLP using the Logical Link Control (LLC) Type 2 procedures is described in section 2. The operation of the X.25/PLP using the LLC Type 1 procedures is specified in section 3. To be used in compliance with the standards ISO 7498:1984; ISO…

Applicable to shunt and series capacitors rated 15 Hz to 60 Hz. This method of verification may be run during the thermal stability type tests required by the relevant IEC standard.

1.1 This standard applies to petroleum distillate fuel for naval use. 1.2 Intended Uses - Fuel described by this standard is intended for use in marine applications (naval) such as boilers, gas turbine power plants, and high and medium speed internal combustion engines of the compression-ignition type operating at an ambient temperature greater than -12 degrees C. Fuel to this standard…

1. Scope 1.1 These requirements apply to both cord-connected and permanently connected electric radiant heaters and infrared and ultraviolet lamp assemblies for warming food or for cosmetic or hygienic purposes in nonmedical applications and in nonhazardous locations using nominal system voltages of 250 V and less, in accordance with the Rules of the Canadian Electrical Code, Part I.…

1. Scope 1.1 This Standard applies to rigid unplasticized poly (vinyl chloride) boxes and fittings of the following types that are intended to be installed and used with rigid PVC conduit at a maximum working temperature of 75°C in accordance with the rules of the Canadian Electrical Code, Part I: (a) junction boxes with an interior volume of 1640 mL× or less that are intended to provide…

1.1 This Standard applies to motor-operated appliances* intended for use on nominal system voltages of 600 V and less, except that where appliances are driven by universal-type motors or electromagnetic mechanisms the scope is limited to appliances rated for use on nominal system voltages of 240 V or less. It applies to appliances designed to be used in accordance with the Rules of the…

1. Scope 1.1 This Standard applies to household coking ranges having a rating not exceeding 250 V and 21kW and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part 1. Note: Throughout this Standard the word appliance(s) is used to refer to the whole group of equipment covered by the Standard. Where a requirement applies only to one type of equipment, eg,…

1. Scope 1.1 This Standard applies to cord-connected and permanently connected engine heaters and battery warmers for use on nominal system voltages of 600 V and less that are designed to be used in nonhazardous locations such as in passenger automobiles, light trucks, and heavy duty on- and off-road vehicles in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2…

1. Scope CAN/CSA-C22.2 No. 231.0-M89 - Electrical and Electronic Measuring and Test Equipment 1.1.1 This Standard applies to electrical, electronic, or electromechanical equipment designed to (a) measure or observe, and indicate quantities of (i) electrical, or (ii) electronic phenomena; or (b) supply (i) electrical, or (ii) electronic quantities for measuring or…