Rechercher

1.1 General This Standard sets forth the requirements for cement prepared specifically for use in masonry mortars.* *Masonry cement is also sold under other names: Mortar Cement, Mortar Mix (Unsanded), Masons Cement, Brick Cement, White Mortar Cement, etc. 1.2 Classification of Masonry Cement 1.2.1 Type n For use in the preparation of Type N masonry mortar, or with the use of…

1.1 Scope This Standard sets forth the definition of blended hydraulic cement; its chemical and physical requirements; the tests required; the procedures for inspection and sampling; the units of measurement; the packaging, marking, and storage; the methods for chemical analysis; the methods for physical testing; and the equipment and materials used in performing the required tests. The…

1.1 This Standard applies to flexible liquid-tight nonmetallic conduit and fittings in trade sizes 3/8 to 2 intended for use as a receway for the installation of conductors in accordance with the Rules of the Canadian Electrical Code, Part I, for nonhazardous locations. 1.2 Flexible liquid-tight nonmetallic conduit covered by this Standard has a reasonable smooth interior, is liquid-tight,…

1.1 The standard states physical and chemical requirements for a liquid, nonionic detergent intended for light-duty cleaning and laundering. 1.2 This includes detergent of the polyethylene-glycol linear alkyl ether or alkyl aryl types, or polyalkylene-glycol (copolyol) including end group modified linear alkyl ether or alkyl aryl ether types. 1.3 For more detailed information on intended uses,…

1 Scope O437.0 1.1 This Standard pertains specifically to a class of mat-formed structural panelboards made predominantly of wood strands or wafers of a minimum and controlled length, a controlled thickness, and a variable or predetermined width, bonded together with a waterproof and boilproof binder. 1.2 These panelboards are intended, and used extensively, for construction applications…

1.1 This standard applies to a solvent type self-extinguishing remover for enamel, paint, varnish or lacquer, suitable for dip-tank or manual application. 1.2 For more detailed information on intended uses, see par. 7.2.

1.1 This standard applies to latex paint for exterior use on primed wood and on masonry surfaces including concrete, brick, stucco, concrete block, and asbestos-cement shingles and siding. 1.2 For more detailed information on intended uses, see par. 7.2.

Specifies two test methods and describes dimensions and characteristics of the standard gauge, standard coating, test methods, determination of wear, and qualitative comparison scales.

1.1 These requirements cover electrically operated single- and multiple-station carbon monoxide (CO) detectors intended for protection in ordinary indoor locations of family living units, including recreational vehicles and mobile homes. For the purpose of these requirements, a family living unit means a housekeeping unit, used or intended to be used as a domicile by one or more persons and…

This National Standard of Canada is equivalent to International Standard ISo 9917-1991. It specifies requirements for the following types of dental cements, including both hand-mixed and capsulated cements for mechanical mixing, which are intended for permanent cementation, lining and restoration, and effect setting only by an aqueous acid-base reaction. Silicate cements based on the…