Quality Management and Quality System Elements - Part 2: Guidelines for
Services
This National Standard of Canada is equivalent to International Standard ISo
9004-2:1991.
This Part of ISO 9004 gives guidance for establishing and implementing a
quality system within an organization. It is based on the generic principles
of internal quality management described in ISO 9004:1987 and provides a
comprehensive overview of a quality system specifically for services.
This…
1.1
This Standard specifies the construction and testing of portable power cables
normally used in applications where the cables are subject to frequent flexing,
and installation is in accordance with CSA Standards CAN3-M421, Use of
Electricity in Mines, and/or C22.1, Canadian Electrical Code, Part I.
1.2
The cable constructions specified in this Standard are suitable for use at a…
Machinery for Forestry - Winches - Classification and Nomenclature
This National Standard of Canada is equivalent to International Standard ISO 6816:1984.
It establishes the classification of the major types of winches and rope
anchors and the nomenclature for major components and parts peculiar to these
machines.
Examples used here are not intended to include all existing commercial machines
nor to be descriptive of any particular machine.
1.1
This Standard covers structural quality steel plates, shapes, hollow sections,
sheet piling, and bars for general construction and engineering purposes.
1.2
A number of strength levels are available under this Standard and are
designated by the minimum yield strength in megapascals. The grades, types,
and strength levels normally available are shown in Table 1. Charpy V-Notch…
1.1
Covers the design, fabrication, installation, inspection, testing, and safety
aspects of the operation and maintenance of gas pipeline systems including
gathering lines, transmission lines, compressor stations, metering and
regulating stations, distribution lines, and service lines.
1 .2
The Scope of this Standard, as shown in Figure 1.1, includes the following:
(a) gas storage…
Méthodes de détermination de la capacité et de la consommation d'énergie
des machines à laver ...
1.1
Cette norme spécifie les méthodes servant à la détermination de la capacité et
de la consommation d'énergie des machines à laver électrodomestiques.
1.2
La norme décrit les méthodes de détermination de la consommation d'énergie et
fixe les limites de cette consommation pour les machines à laver à chargement
vertical de modèles standard ou compact.
1.3
La norme vise les…
1.1
This Standard is intended to describe the minimum requirements for
(a) the application and finishing of gypsum board used in wall and ceiling
construction (except gypsum board to receive plaster); and
(b) the installation of framing to receive the above gypsum board.
1.2
Where a fire resistance rating is required, the installation, including type
and spacings of fasteners, shall be…
Sets out general requirements and gives guidelines for selecting and
implementing risk analysis techniques, primarily for technological hazards.
Risk analysis is a structured process that attempts to identify both the extent
and likelihood of consequences associated with such hazards. Risk analysis
answers three fundamental questions:
(1) What can go wrong?
(2) How likely is it? and
(3…
1.1 This Standard covers barrel-type hydrants with compression shut-off and
slide gate shut-off, for general water works service.
1.2 Hydrants shall be designed for a minimum working pressure of 1000 kPa.
1.3 Hydrants of special design, including those having built-in hose gates,
and hydrants designed for higher working pressure are not covered by this
Standard.
1.4 Hydrants with…
Standard for Light Attack Fire Fighting Apparatus (Mini-Pumper)
1. SCOPe
1.1 This Standard is intended to cover essential requirements for ensuring
satisfactory performance of light attack apparatus for fire-fighting service.
1.2 The type of apparatus covered by this Standard is intended to supplement
the standard apparatus normally used by public fire departments.
