1. Scope
1.1 This standard specifies the requirements for two types of
detergent-resistant water-emulsion floor polish suitable for general
application on most floors other than wood and on sealed wood floors.
It should not be used on unsealed wood, cork or magnesite floors. The
floor finish may be maintained by spray buffing techniques using…
1. Scope
1.1 This standard specifies the requirements for a synthetic liquid
detergent containing a phenolic, quaternary ammonium or other type of
germicide.
1.2 Germicidal liquid detergent produced to this standard is intended
primarily for the general cleaning and disinfecting of floors, walls
and other hard surfaces in institutions where the…
1. Scope
1.1 These requirements apply to the following stationary equipment for use in nonhazardous locations rated 7200 V or less, single- or 3-phase, and remote control assemblies for such equipment.
(a) Heat pumps, for heating and cooling with or without factory or field-installed electric resistance heaters, or hot water or steam heating coils.
(b) Air conditioners for cooling…
Information technology — 90 mm flexible disk cartridges — 21 MBytes formatted capacity — ISO Type 30...
Specifies the mechanical, physical and magnetical characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. It also specifies the method of recording, the quality of recorded signals, the track layouts and the track formats. Such flexible disk cartridges are identified as ISO type 305. Together with a standard for volume and file structure,…
Information technology - 90 mm flexible disk cartridges - 21 MBytes formatted capacity - ISO Type 30...
Specifies the mechanical, physical and magnetical characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. It also specifies the method of recording, the quality of recorded signals, the track layouts and the track formats. Such flexible disk cartridges are identified as ISO type 305. Together with a standard for volume and file structure,…
1. Scope
1.1 General This Special Publication provides a method for conducting a Life Cycle Review (LCR), a less detailed and more qualitative alternative to a Life Cycle Assessment (LCA). It is primarily intended to assist small and medium-sized businesses in reviewing the various stages of the life cycle of a product, package, process, or activity (hereafter referred to collectively as a…
1. Scope
1.1
This Standard applies to all nonprescription sunglasses, having lenses of
substantially plano power, normally used where safety eyewear is not
specifically recommended.
1.2
This Standard provides requirements for transmittance of ultraviolet radiation
and visible light, qualification of lens types, impact resistance, cosmetic
quality, refractive properties, lens warpage,…
1. Scope
1.1 This standard applies to a synthetic laundry detergent in granular or
powder form based on surfactant and suitable builders and designed for
laundering in all types of water.
1.2 This detergent is not recommended for use in mechanical dishwashers.
It is recommended that the textile care labelling system
(CAN/CGSB-86.1) be referred to…
1. Scope
1.1 This standard applies to two types of cotton/polyester bleached or dyed
pillowcases. These products are not recommended for use in hospital
operating rooms.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all…
Information technology — International Standardized Profiles FVT2nn — Virtual Terminal Basic Class —...
Contains the definition of a control object type that may be used to enhance the field definition capabilities defined in the ISO 9040 and ISO 9041 VT standards in order to provide a flexible mechanism for using and updating field definition records.
