1. Scope
1.1
This Standard specifies the chassis and body requirements for school buses.
1.2
This standard applies to Types A1, A2, B, C, and D school buses.
1.3
This Standard does not cover after-market and retrofit installations. These
installations are covered by federal and provincial regulations and it is the
responsibility of the appropriate jurisdiction to inspect and…
1.1 SCOPE
1.1.1 This standard applies to newly produced vented gas-fired space heating
appliances (see Part XIV, Definitions), hereinafter referred to as
appliance(s), constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use with manufactured gas;
c. For use with mixed gas;
d…
1.1 SCOPE
1.1.1 This Standard covers CGA 791 (Type I) and CGA 810 (Type II) cylinder
connection devices, as defined in Part IV, Definitions, intended to
connect the cylinder valve on portable LP-Gas containers to the inlet
of the regulator on outdoor cooking gas appliances. These cylinder
connection devices are intended for vapour withdrawal service only…
Gas Water Heaters
Volume 1, Storage Water Heaters With Input Ratings of 75,000 Btu Per Hour or
Les...
1.1 SCOPe
1.1.1 This standard applies to newly produced, automatic storage water
heaters having input ratings of 75,000 Btu per hour (21 980 W) or less
(see Part IV, Definitions) hereinafter referred to as water heaters or
appliances, constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use…
User Selection Guide to CSA Standard A440-98, Windows
1. Scope
1.1 Classifications and Test Requirements
Classification levels and test requirements provided within CSA Standard A440
and this Special Publication allow a purchaser or specifier to select windows
suitable to their specific climatic conditions, height of installation, type of
building, etc. The authority having jurisdiction assigns the minimum levels to
be met. All other…
CAN/CSA-A5-98 Portland Cement
1. Scope
1.1 Scope
This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage.
1.2 Types
The five types of Portland cement covered in this Standard are identified as follows:
Type…
1. Scope
1.1 Scope
This Standard addresses the definition of Portland cement; the chemical,
physical, and uniformity requirements; the tests required; the procedures for
inspection and sampling; the units of measurement, packaging, marking, and
storage.
1.2 Types
The five types of Portland cement covered in this Standard are identified as
follows…
1. Scope
1.1 General
This Standard addresses the definition of blended hydraulic cement; its
chemical and physical requirements; the tests required; the procedures for
inspection and sampling; the units of measurement; and its packaging, marking,
and storage. The intent of this Standard is to define the properties of the
blended product; it does not include cases in which the…
Sterilization of health care products - Requirements for validation and routine control - Radiation ...
This National Standard of Canada is equivalent to International Standard ISO 11137:1995.
1 Scope
This International Standard specifies requirements for validation, process
control and routine monitoring in the radiation sterilization of health care
products. It applies to continuous and batch type gamma irradiators using the
radionuclides 60 Co and 137 Cs, and to irradiators using a…