Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures "d"
This National Standard of Canada is equivalent to International Standard IEC 60079-1:2001.
1. Scope
This part of IEC 60079 contains the specific requirements for the construction
and testing of electrical apparatus with the type of protection flameproof
enclosure "d", intended for use in potentially explosive gas atmospheres.
Hearing Protection Devices - Performance, Selection, Care, and Use
1. Scope
1.1 General
Clauses 4 to 7 of this Standard cover performance and testing requirements for personal hearing protection devices. Clauses 8 to 12 cover the selection, care, and use of hearing protection devices as required for an effective hearing conservation program.
1.2 Types
The following types of hearing protectors are covered in this Standard: earplugs, earmuffs, communication…
Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling "q"
This National Standard of Canada is equivalent to International Standard CEI/IEC 60079-5:1997.
1 Scope
This part of IEC 60079 contains the specific requirements for the construction,
testing and marking of electrical apparatus, parts of electrical apparatus and
Ex components in the type of protection powder filling "q", intended for use in
potentially explosive atmospheres of gas,…
1 Purpose
This standard specifies hog production characteristics and requirements to
which hog producers shall conform in relation to their activities.
The purpose of this standard is to reassure consumers and intermediaries of hog
producer conformity with the requirements of the Canadian Quality Assurance
program and the implementation, in the production unit, of additional measures…
Hydrometric determinations — Geophysical logging of boreholes for hydrogeological purposes — Conside...
This Technical Report is a summary of best practice for those involved in geophysical borehole logging for hydrogeological purposes. It describes the factors that need to be considered and the measurements that are required to be made when logging boreholes. There can, however, be no definite "standard" logging procedure because of great diversity of objectives, ground-water conditions…
Road vehicles — Test methods for electrical disturbances from electrostatic discharge
This International Standard specifies electrostatic discharge (ESD) test methods for evaluating electronic modules intended for use in road vehicles, including procedures for evaluating electronic modules on both the bench and on completed vehicles. Additionally, it specifies a test procedure for classifying the ESD sensitivity of modules for packaging and handling, a procedure for calibrating…
Two-wheeled motorcycles — Antilock braking systems (ABS) — Tests and measurement methods
This International Standard specifies tests and measurement methods for solo motorcycles (defined in ISO 3833) equipped with one or more antilock, and one or more independent, braking systems. It sets out procedures for the following types of straight-line braking tests: utilization-of-adhesion test; wheel-lock check test; tests with ABS failed; complementary tests that could assist in the…
Two-wheeled mopeds — Antilock braking systems (ABS) — Tests and measurement methods
This International Standard specifies tests and measurement methods for solo mopeds (defined in ISO 3833)
equipped with one or more antilock, and one or more independent, braking systems. Its purpose is to establish
uniform worldwide test procedures for such systems.
This International Standard sets out procedures for the following types of straight-line braking tests:
utilization-of-adhesion…
Information technology - 8 mm wide magnetic tape cartridge for information interchange - Helical sca...
This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to
enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording
method and the recorded format called VXA-1, and thereby allowing data interchange between drives by means of such
magnetic tape cartridges.…
Industrial automation systems and integration — Product data representation and exchange — Part 24: ...
This part of ISO 10303 specifies a C programming language late binding of the capability specified in
ISO 10303-22 - Standard data access interface (SDAI). This binding is a late binding and as such, none
of the constants, data types, and functions depend on the application schema being accessed.
The following are within the scope of this part of ISO 10303:
— access to and manipulation of data…