Rechercher

1. Introduction CSA Standard B619 (referred to from this point forward as #the standard# or #B619#) was developed to address the unique requirements of the trucking industry. It was designed to provide assurances to stakeholders (such as insurance companies and federal and provincial regulators) that the carrier is committed to complying with all transportation safety requirements. The…

1. Scope 1.1 This Standard applies to motor-operated liquid pump units, for use in nonhazardous, indoor, outdoor (exposed), and submerged locations, and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to (a) pumps for either permanent or cord-connection to the source of supply; (b) cord- and plug-connected pumps; and (c)…

1. SCOPE 1.1 This Standard specifies the requirements for factory made rigid expanded polystyrene insulation in the form of pipe covering and boards with or without facings or coatings made by moulding (EPS) or extrusion (XPS) of expandable polystyrene beads. This Standard does not apply to laminated products manufactured with any type of rigid board facer including fibreboard, perlite…

This set of packages provides a standard for the declaration of most frequently used real and complex elementary functions required for numerically oriented modeling applications. Use of these packages with their defined data types, constants, and functions is intended to provide a mechanism for writing VHDL models (compliant with IEEE Std 1076-1993) that are portable and interoperable with other…

This standard supports the synthesis and verification of hardware designs, by defining vector types for representing signed or unsigned integer values and providing standard interpretations of widely used scalar VHDL values. Includes package bodies, as described in annex A, which are available in electronic format either on a diskette affixed to the back cover, or as a downloadable file from the…

Gives a comprehensive description of the mechanical and electrical characteristics of these fuses and of the relevant tests. Describes six types of standardized fuses: D types fuses; cylindrical fuses (types A, B, C); pin-type fuses; cylindrical fuse links (primarily used in plugs). This new publication is of equal interest to the manufacturer and to the user of fuses namely for household and…

Gives a comprehensive description of the mechanical and electrical characteristics of these fuses and of the relevant tests. Describes six types of standardized fuses: D types fuses; cylindrical fuses (types A, B, C); pin-type fuses; cylindrical fuse links (primarily used in plugs). This new publication is of equal interest to the manufacturer and to the user of fuses namely for household and…

This part of IEC 61982 is applicable to performance and life testing of electrical energy storage systems for general purpose, traffic compatible, light urban use electric road vehicles that are designed for transportation of passengers or goods in city centre driving. For the purposes of this standard, the electrical energy storage system is defined as one that is recharged electrically though…

Establishes standard test procedures for photodiodes used in scintillation detectors and defines the parameters which shall be provided by the supplier for each type of photodiode.

This National Standard of Canada is based on International Standard ISO 13256-1:1998. 1 Scope 1.1 This part of ISO 13256 establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven, mechanical-compression type, water-to-air and brine-to-air heat pumps. The requirements for testing and rating contained in this part of ISO…